Advertisement
9.
EVENT CONFIGURATION
This section describes how to configure the camera to perform certain actions
when events occur. Actions such as audio detection, Ethernet loss, video loss,
motion detection, etc. can trigger an event such as alarm out, audio out, etc. You
can configure actions to trigger the event.
You can configure event config such as audio detection, video loss etc by
performing the following steps:
Log on to the network camera to open its Live View page.
Click the Configuration menu.
In the left pane, click on the Event-Config.
You can configure different events by clicking on the different button on the event-
config menu bar.
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
Page 39 of 62
Advertisement
