Table of Contents
Advertisement
DP6060 Dual-Input Process Meter
Setting the Display Parameter & Intensity (dsplay)
The Upper display ( Big ) can be programmed to display:
1.
Process value Ch-A
2.
Process value Ch-B
3.
Process value Ch-C
4.
Toggle between Ch-A & Ch-B, Ch-A & Ch-C, Ch-B & Ch-C,
and Ch-A, Ch-B, & Ch-C
5.
Relay set points
6.
Max & min values for each channel
7.
Toggle between Channel & units
8.
Channel gross value (no tare) or toggle net (tare) and gross
values
9.
Modbus input
The Lower display ( Little ) can be programmed to display:
1.
Process value Ch-A
2.
Process value Ch-B
3.
Process value Ch-C
4.
Toggle between Ch-A & Ch-B, Ch-A & Ch-C, Ch-B & Ch-C,
and Ch-A, Ch-B, & Ch-C
5.
Relay set points
6.
Max & min values for each channel
7.
Toggle between Channel & units
8.
Channel gross value (no tare) or toggle net (tare) and gross
values
9.
Modbus input
10. Off (no display)
11. Engineering units or custom legends
Display Intensity: The meter has eight display intensity levels to give
the best performance under various lighting conditions. Select intensity
8 for outdoor applications. The default intensity setting is 8.
44
Instruction Manual
Advertisement
Table of Contents
