Physical Dimensions
Table 4.2 contains the physical dimensions and weight for the ServerIron 4G Series chassis.
.
Height
Width
2.60 in
17.63 in
6.6 cm
44.8 cm
Power Supply Specifications
This section contains the following sections:
•
"Physical Dimensions" on page 4-23
•
"Input Connector Properties" on page 4-23
•
"Regulatory Compliance" on page 4-24
•
"Electrical Specifications" on page 4-26
Physical Dimensions
Table 4.3 contains the physical dimensions and weight for the power supplies.
Table 4.3: Physical Dimensions and Weight of Power Supplies
Power Supply
RPS5
RPS5DC
Input Connector Properties
Table 4.4 contains the input connector properties for the power supplies.
Power Supply
RPS5
RPS5DC
October 2008
Table 4.2: Physical Dimensions and Weight of Chassis
Depth
19.6 in
47.2 cm
Dimensions
2.36 in (H) x 8.04 in (W) x 6.45 in (D)
5.99 cm (H) x 20.42 cm (W) x 16.38 cm (D)
2.36 in (H) x 8.04 in (W) x 6.45 in (D)
5.99 cm (H) x 20.42 cm (W) x 16.38 cm (D)
Table 4.4: Input Connectors for Power Supplies
Input Connector Properties
Standard IEC type (IEC320)
C14 type: UL/CSA 15A/250V, VDE 10A/250V
Orientation: Ground pin down
3-position Phoenix Contact
The power supply is connected to Earth Ground using wire
attached to the ground stud on the power supply rear panel.
© 2008 Foundry Networks, Inc.
Weight
•
25.35 lbs (11.5 kg) fully loaded, including dual
redundant power supplies
•
17.5 lbs (7.94 kg) empty
•
.4 lbs (.18 kg) power supply blank
Weight
4.1 lbs (1.88 kg)
3.75 lbs (1.70 kg)
ServerIron 4G Series
4 - 23