Foundry ServerIron Hardware Installation Guide
Figure 4.2 ServerIron 4G-SSL
Figure 4.3 ServerIron 4G-SSL-FIPS
Common Features
•
Compact 1.5 RU Height
•
4-Ports of 100/1000 Mbps Copper and Gigabit Fiber Combination
•
Optional Redundant and Hot Swappable Power Supplies in the Rear (DC power option is available)
•
Wire-Speed Layer 2/3 Switching and Routing for Non-Application Flows
•
All Features of TrafficWorks OS
Common Components
This section describes hardware components that are common to the ServerIron 4G Series SSL and non-SSL
Stackable device switches.
Front Panel
Figure 4.4 on page 4-3 shows the ServerIron 4G Series front panel.
NOTE: The ServerIron 4G-SSL front panel shown below is identical to the ServerIron 4G front panel. Only the
name (4G-SSL) on the front panel is different.
WARNING: On the right-hand side of the front panel is ia small, rectangular, face plate that can be unscrewed.
Hidden behind this face plate you have direct console access to the application processor. This port should
NEVER be accessed without specific instructions and guidance from Foundry TAC.
4 - 2
© 2008 Foundry Networks, Inc.
October 2008