Supervisor Password - Micronics D5CUB PCI Manual

This selection specifies the DMA setting for the onboard
sound. The default setting is DMA 1.
This selection enables or disables the onboard joystick
port. The default setting is Enabled.
The Supervisor Password utility allows you to setup,
change or disable the password stored in the BIOS. The
Supervisor Password allows access to the system and
Setup. To setup or change a password, highlight the
SUPERVISOR PASSWORD option on the main menu
screen and press <Enter>.
The password can be no more than eight characters long.
The program will prompt you to confirm the new pass-
word before exiting and enabling the utility. To disable
the password, press <Enter> when the program prompts
you to enter the new password.
WARNING: If you forget the Supervisor Password, it cannot
be disabled without resetting the CMOS.
The User Password utility allows you to setup, change or
disable the password stored in the BIOS. Follow the same
procedure used to setup the Supervisor Password. The
User Password allows access to the system, but will not
allow you to modify the CMOS settings.
NOTE: After a password is entered, it is saved immediately.
All other changes may still be discarded (see Exit Screen).