Installing The D5Cub - Micronics D5CUB PCI Manual

Quick Installation
1
We know that many experienced people prefer to read as
little of the documentation as possible. If this sounds like
you, here's the short form to get up and running quickly.

Installing the D5CUB

1. Make backup copies of your installation and configu-
2. Ground yourself to prevent damaging static dis-
3. Remove the D5CUB from its packaging.
4. Configure and verify the system board's jumper set-
5. Install the CPU and the system memory.
6. Install the system board in the chassis and make all
7. Install any ISA and PCI add-on peripherals.
8. Connect any optional devices.
9. Turn the computer on and press the <DEL> key
ration diskettes.
charge by using an anti-static wrist or ankle strap, or
touch a safely grounded metal object.
tings (refer to Jumper Settings in Section 2).
necessary case connections.
when you see the screen shown in Figure 1.1.