Id Timeout Setting - Panasonic DP-C354 Operating Instructions Manual

ID Timeout Setting

If the ID Timeout Setting is set to "Auto Rst", authentication is cancelled if no operation is performed on the
machine for a specified time period after performing authentication. The ID timeout period is set by the "Auto
Reset Time Setting" on page 19.
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
Enter the Key Operator's password (8-digit),
and then select "OK" .
Note:
Default password is "00000000".
To change this password, select "85 Key Operator
Password" in the General Setting (For Key Operator),
and then re-enter the new password.
Select "60 - 79" tab, and then scroll the screen,
and choose "76 ID Timeout".
3
Continue on the next page...
17