Logon Attempts Setting
The system is lockout if the permitted number of logon attempts is exceeded during the User Authentication.
This sets the number of permitted number of logon attempts.
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
20
Enter the Key Operator's password (8-digit),
and then select "OK" .
Note:
Default password is "00000000".
To change this password, select "85 Key Operator
Password" in the General Setting (For Key Operator),
and then re-enter the new password.
Select "60 - 79" tab, and then scroll the screen,
and choose "77 Logon Attempts".
3
Select "Input", and enter the number of logon
attempts, and then choose "OK".
Unlimited logon attempts is allowed if you set "0".
Press the Reset key to return to standby.