Panasonic DP-C354 Operating Instructions Manual page 24

Select "120 - 159" tab, and then scroll the
screen, and choose "131 Job Tracking".
3
Note:
Fax parameter No. can be directly selected using
with Keypad for quick operation.
If a parameter No. is known, enter desired parameter
No. with Keypad, and then press the Start key.
Ex: Enter "132" with Keypad, and then press the
Start key to select "132 Via Fax Server"
Select the Job Tracking function, and then
choose "OK" .
None Disables Job Tracking.
Records sending (Transmit) only.
Tx
Rx Records receiving only.
Tx & Rx Records sending and receiving.
24
Select the Email address to which to send the
log, and then choose "OK".
Select the printout method for the received
document(s), and then choose "OK".
This screen only appears if the RX, or TX&RX
is selected on the step 7.
Inc Prints only if the log was unable to be sent
to the specified destination on the Step 8.
On Always prints.
Press the Reset key to return to standby.