Id Timeout Setting - Panasonic Panafax UF-7000 Network Connection

ID Timeout Setting

If the ID Timeout Setting is set to "AUTO RESET TIME", authentication is cancelled if no operation is performed
on the machine for a specified time period after performing authentication. The ID timeout period is set by the
"AUTO RESET TIME Setting" on page 18.
Note:
When the User Authentication function is enabled, you must login to the machine to change settings. See the following
sections for details about how to login.
See "Administrator Login" on page 24 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
Login to the machine, and press
Enter the access code (4-digit) set for the machine, and press
Press , and then press
Select the ID Timeout setting.
: (AUTO RESET TIME) An authenticated user will be logged
SET
out if no operation is performed on the machine for a
specified time after performing authentication.
: (AFTER EVERY JOB) An authenticated user will be logged
SET
out when the operation performed after authentication is
completed.
Press to return to standby.
STOP
FUNCTION SET
.
SET
ENTER ACCESS CODE
.
ENTER ACCESS CODE
SET .
FAX PARAMETER(1-182)
127 ID TIMEOUT
1:AUTO RESET TIME
****
NO.=
17