Authentication Method Setting
This specifies which authentication method to use by the User Authentication function.
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
22
Enter the Key Operator's password (8-digit),
and then select "OK" .
Note:
Default password is "00000000".
To change this password, select "85 Key Operator
Password" in the General Setting (For Key Operator),
and then re-enter the new password.
Select "60 - 79" tab, and then scroll the screen,
and choose "74 Authentication Method".
3
Select the authentication method, and then
choose "OK" .
NTLM
Selects NTLM.
Clr Text
Selects CLEAR TEXT.
Press the Reset key to return to standby.