ID Timeout Setting
If the ID Timeout Setting is set to "Auto Reset Time", authentication is cancelled if no operation is performed
on the machine for a specified time period after performing authentication. The ID timeout period is set by the
"Auto Reset Time Setting" on page 17.
Press the Function key on the Control Panel.
Select "GENERAL SETTINGS".
Select "09 Key Operator Mode".
Enter the Key Operator's Password (8-digit),
and then select "OK" .
16
Select "58 ID Timeout".
Select the ID Timeout setting, and then select "OK".
Auto
An authenticated user will be logged
Reset
out if no operation is performed on
Time
the machine for a specified time after
performing authentication.
After
On completion of a job, the
Every
authenticated user will be logged out
Job
when a new operation is performed.
Press the Reset key to return to standby.