Air Recirculation On/Off Button (G); Climate Control Compressor Enabling/Disabling Button (F) - Fiat Ducato Owner's Manual

IMPORTANT Should the system (after manual settings)
DASHBOARD no longer be able to guarantee the required temperature
AND CONTROLS set in the passenger compartment, the set temperature
value will start flashing to indicate the difficulties the sys-
tem is experiencing and then the word AUTO will go out.
To restore system automatic control at any time, after one
SAFETY
or more manual adjustments, press the AUTO button.
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
❒ override on (air recirculation always on), indicated by
the LED in button
play;
IN AN EMERGENCY ❒ override off (air recirculation always off and introduc-
tion of outside air), indicated by the fact that the LED
in the button goes off and symbol ê will appear on the
display.
MAINTENANCE
These operating conditions are obtained by pressing air
AND CARE
recirculation button G in sequence.
IMPORTANT The engagement of the air recirculation sys-
TECHNICAL
tem makes it possible to reach the required heating or
SPECIFICATIONS
cooling conditions faster.
INDEX
62

Air recirculation on/off button (G)

The Air recirculation works according to
the following operating logics:
being on and symbol í in the dis-
G
It is however inadvisable to use it on rainy/cold days as it
would considerably increase the possibility of the windows
misting up, especially if the climate control compressor is
off.
The recirculation is forced off (i.e. air is introduced from
the outside) when the the outside temperature is cold to
prevent misting up.
It is advisable not to use the air recirculation function when
the outside temperature is low to prevent the windows
from rapidly misting up.
Climate control compressor
enabling/disabling button (F)
Pressing the √ button switches the climate
control compressor off, it if was on previ-
ously and the logo in the display goes out.
Press the button when the LED is off to automatically re-
store system control and use of the compressor. The icon
will light up in the display in this case.
The system will switch the recirculation off when the com-
pressor is switched off to prevent the windows misting up.
Although the system is capable of maintaining the required
temperature, the word FULL will disappear from the display.
If the system is no longer able to maintain the temperature,
the figures will flash and the message AUTO will go off.