Cylinder Replacement Procedure; When Needing To Change A Bulb - Fiat Ducato Owner's Manual

CYLINDER REPLACEMENT PROCEDURE

To replace the cylinder, proceed as follows:
❒ press button A – fig. 172 to release the replacement
part;
❒ fit the new cylinder and press until it is automatically
engaged.
fig. 171
fig. 172
WHEN NEEDING TO CHANGE
A BULB
GENERAL INSTRUCTIONS
❒ When a light is not working, check that the corre-
B
❒ before changing a bulb check the contacts for oxidation;
❒ burnt bulbs must be replaced by others of the same type
❒ always check the height of the headlight beam after
F0N0830m
may reduce the intensity of the emitted light and
even compromise duration of the bulb itself. In the
event of accidental contact, rub the bulb with a cloth
dampened with alcohol and let it dry.
F0N0829m
sponding fuse is intact before changing a bulb. For the
location of fuses, refer to the paragraph "If a fuse blows"
in this section;
and power;
changing a bulb.
Halogen lamps must be handled holding
the metallic part only. Touching the trans-
parent part of the bulb with your fingers
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
177