To Change A Wheel - Fiat Ducato Owner's Manual

WARNING
Repair and refit the standard wheel as
soon as possible. Do not apply grease to
the bolt threading before assembly: they might
come unscrewed.
WARNING
The jack may only be used to replace
wheels on the car which it equips or oth-
er cars of the same model. Never use the jack for
other purposes, such as lifting other car models.
Never use the jack to carry out repairs under the
vehicle. Incorrect positioning of the jack may
cause the lifted vehicle to fall. Do not use the jack
for loads higher than those shown on the label.
WARNING
Never tamper with the inflation valve.
Never introduce tools of any kind between
rim and tyre. Check tyre and spare wheel pressure
regularly referring to the values shown in the
"Technical Specifications" section.
Important notes:
❒ the jack weight is 4.5 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired. If it breaks it must be re-
placed with a new jack;
❒ no tool other than its cranking device may be fitted on
the jack.
WARNING
No tools other than the crank provided
should be used with the spare wheel lift-
ing device; it should be operated by hand, only.
To change a wheel proceed as follows:
❒ stop the vehicle in a position so that it is not a danger
for on-coming traffic in a location where you can re-
place the wheel safely. The ground must be flat and
compact;
❒ turn the engine off and pull up the handbrake;
❒ engage first gear or reverse;
❒ wear the reflecting safety jacket (compulsory by law in
certain countries) before getting out of the vehicle;
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
167