Motorola VIP1910 Installation Manual page 8

InstallIng the VIP1910/VIP190
j
Connecting to broadband
Connect one end of the Ethernet cable to the connector marked
ETHERNET on the rear panel of the set-top box and the other end to a hub
or the Ethernet wall connector provided by your broadband operator.
k
Connecting to the TV set
Connect one end of the enclosed SCART cable to the SCART connector
marked TV on the set-top box and the other end to your TV set. Both analog
audio and standard definition video are sent to the TV set through this con-
nection.
l
Optional: Connecting to a VCR or digital video recorder
You can record the program you are currently watching by connecting an
auxiliary device, such as a VCR or a digital video recorder, to the VIP1910/
VIP1920, provided that the program is copy-approved content.
Connect the set-top box to the auxiliary device using the SCART connector
marked "VCR" .
To record, change to the TV channel on the set-top box you wish to record
and start recording on the device.
To watch recorded video, first put the set-top box in stand-by mode, and
then press play on the auxiliary device.