Motorola VIP1910 Installation Manual page 10

oPtIonal: ConneCtIng hIgh DefInItIon
VIDeo
If your TV set is HDTV compatible, you can connect the set-top box to the
TV set using the HDMI or the component connectors instead of the SCART
connector to receive and display HDTV, i.e. skip installation step
replace it with installation step
m
Using the HDMI connector
If your TV set has a HDMI connector, you can connect it to the HDMI
connector on the set-top box with a HDMI cable (not included) to receive
digital high definition video and digital audio.
n
Using the component connectors (YPbPr)
If your TV set has a component video connectors (YPbPr), you can connect
it to the component connectors on the set-top box with three RCA cables
(not included) to receive analog high definition video.
Make sure to match the connectors so that Y on the set-top box is
connected to Y on the TV set, Pb to Pb and Pr to Pr.
Note! The component connectors only send video signals. To receive audio
you also need to use one of the possible audio connections, i.e. step
or .
q
RF - IN
RF - OUT
m or n
n
ETHERNET
HDMI
USB
m
TV
10
.
VCR
S/PDIF
Y
L
Pb
TV
Pr R
TOSLINK
Y
Pb
Pr
and
k
,
o p
POWER
+5.7V DC
0V