Motorola VIP1910 Installation Manual page 11

oPtIonal: ConneCtIng to external auDIo
If you want to use an external source to play audio such as a stereo or
home cinema equipment or if you are using the component connectors to
connect the set-top box to the TV set, there are three possible methods of
connecting to audio.
o
Analog stereo: Using the Audio L/R connectors
Connect a dual RCA cable (not included) to the Audio L/R connectors on
the set-top box and connect the other ends to your stereo or TV set. Make
sure to match the connectors so that L on the set-top box (white) is con-
nected to L on the TV set or stereo and R is connected to R.
p
Digital audio: Using the SPDIF connector
Connect a RCA cable (not included) to the SPDIF connector on the set-top
box and connect the other end to your stereo or TV set.
q
Digital audio: Using the optical Toslink connector
Connect a Toslink cable (not included) to the Toslink connector on the set-
top box and connect the other end to your stereo or TV set.
RF - IN
RF - OUT
ETHERNET
o
HDMI
USB
11
L
S/PDIF 1
R
p
VCR VCR VCR VCR
S/PDIF
Y Y
Pb Pb L
POWER
TV TV TV TV
Pr Pr R
TOSLINK
q
Stereo/
S/PDIF 2
HiFi system
+5.7V DC
0V