Contents Of Carton; Unpacking - 909 PS120 Instruction Manual

120w 200mm wetstone sharpener
Table of Contents

Advertisement

Check that the wheel rotates freely each time before
start up.
Check that the tool rests are properly adjusted before
commencing use.
Do not overload the sharpener. Allow the sharpener to
run at full speed, or close to full speed during use.
Never apply excessive pressure to the wheel. It might
shatter causing personal injury.
Make sure that the wheel is not in contact with the work
when you start the sharpener.
When using the sharpener, use safety equipment
including safety goggles or shield, ear protection, dust
mask and protective clothing including safety gloves.
Wear goggles
Wear ear muffs
Wear a breathing mask

Contents of carton

Wetstone sharpening system complete with sharpening
stone and leather honing wheel
Water reservoir
Tool support
Adjustable tool holder
Angle gauge
Lapping paste
Knife blade holder

Unpacking

Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
6

Advertisement

Table of Contents
loading

Table of Contents