Yada Dash Road Cam HD User Manual page 11

your selection, and press the key to exit and to record. The default is 10 minutes.
Auto Close Panel: Select On or Off, and press
to save the settings. The default is On.
After one minute of recording the screen will automatically shut off.
Audio Setting: Choose On or Off, and press the
key to save the settings. If you do not want the video with
sound, you can select Off. On the right middle of screen will appear .
G-Sensor Setting: Select the sensitivity of the G-Sensor Low, Mid, or High. This is the sensitivity to turn on
the Accident record mode. The default setting is Low. In the event of an accident, you can also press the
Accident button on the camera. A red triangle will appear on the screen. The camera will automatically
save the current and previous files and they will not be recorded over. Files will have an icon of a key in the
top left corner to designate them as saved.
Standby Videos Setting: Use the
button to select On / Off then press . Having the Standby
Videos On will means the Dash Road Cam HD will continue recording even the power disconnected or
engine off. In the Standby recording mode, the screen will shut off 30 seconds after the power disconnected,
but video recording will be continue. The default is Off.
9