Quickdial; Store A Number In The Quickdial Memory; Dial A Quickdial Number; Delete A Quickdial Number - BT STUDIO 500 User Manual

5464 BT Studio 500/Twin UG [2]

Quickdial

Store a number in the Quickdial memory

You can store up to 10 numbers for easy dialling.
Each number can be up to 20 digits long.
1. Press . Display shows the
2. Select the location number
to store the number.
3. Enter the telephone number then press
confirmation beep.

Dial a Quickdial number

1. Press then
2. Press the location number
is stored. The number is displayed and dialled.

Delete a Quickdial number

1. Press then the location number
the phone number you want is stored.
2. Press to delete.
14/8/03
BT Studio 500/Studio 500 Twin – 3rd Edition – 14th August '03 – 5464
icon.
(0 – 9) under which you want
.
(0 – 9) under which the entry
(0 – 9) under which
3:32 PM Page 17
You hear a warning beep if you try
to enter more than 20 digits.
Deleting the last digit
If you make a mistake, press
Cancel storing a number
Press
Inserting a Pause
When storing a Quickdial number
you can insert a Pause in the
. You hear a
dialling sequence. This can be
useful if your phone is connected
to an internal switchboard. See
page 33 for more information.
If you hear a beep when trying to
dial a Quickdial number, it means
no number has been stored.
Alternatively, you can overwrite a
number by storing a new one in
its place.
.
at any time.
17