Chevrolet Captiva Owner's Manual page 73

If the child restraint does not have the
LATCH system, you will be using the
safety belt to secure the child restraint
in this position. Be sure to follow the
instructions that came with the child
restraint. Secure the child in the child
restraint when and as the instructions
say.
If more than one child restraint needs to
be installed in the rear seat, be sure to
read Where to Put the Restraint on page
2-36.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the
lap and shoulder portions of the
vehicle's safety belt through or
around the restraint. The child
restraint instructions will show you
how.
3. Push the latch plate into the buckle
until it clicks.
Position the release button on the
buckle so that the safety belt could
be quickly unbuckled if necessary.
Seats and Restraints 2-43
4. To tighten the belt, push down on
the child restraint, pull the shoulder
portion of the belt to tighten the lap
portion of the belt and feed the
shoulder belt back into the retractor.
When installing a forward-facing
child restraint, it may be helpful to
use your knee to push down on the
child restraint as you tighten the
belt.
If the child restraint system has a
lock-off mechanism, use it to secure
the vehicle safety belt.