Chevrolet Captiva Owner's Manual page 254

9-56 Vehicle Care
Removing the Flat Tire and
Installing the Spare Tire
1. Do a safety check before proceed-
ing. See If a Tire Goes Flat on page
9-53.
Call CHEVROLET retailer for
assistance if it is not safe to jack the
vehicle or change the tire safely.
2. Use the wheel wrench or screw-
driver to remove the wheel cover if
there is one.
3. Use the wheel wrench to loosen all
the wheel nuts. Do not remove any
of the nuts until the wheel is off the
ground.
4. Attach the wheel wrench to the jack
bolt head and rotate the wheel
wrench clockwise to lift the head a
little.
5. There are notches under the doors at
the front and rear of the vehicle.
Position the jack vertically at the
front or rear jacking notch closest to
the wheel being changed. Make
sure all of the jack lift head is
touching the jacking flange under
the body. Do not place the jack
under a body panel. The lower body
panel has an arrow to aid in locating
the jacking location.
6. Put the compact spare tire near you.