Chevrolet Captiva Owner's Manual page 257

14. Turn the wheel wrench or jack
handle counterclockwise to lower
the vehicle to ground.
Warning
Wheel nuts that are improperly or
incorrectly tightened can cause
the wheels to become loose or come
off. The wheel nuts should be
tightened with a torque wrench to
the proper torque specification
after replacing.
Caution
Improperly tightened wheel nuts can
lead to brake pulsation and rotor
damage. To avoid expensive brake
repairs, evenly tighten the wheel nuts
in the proper sequence and to the
proper torque specification.
Vehicle Care 9-59
15. Tighten the wheel nuts to 140 Nm
(100 lb-ft) in a crisscross sequence,
as shown.
16. Install the wheel cover if there is
one.
17. Lower the jack all the way and
remove it from under the vehicle.
18. Tighten the bolts firmly with the
wheel wrench or jack handle.