External Cleaning; How To Service The Appliance - Smeg GW3060 User Manual

9.7

EXTERNAL CLEANING

The external parts of the appliance must be periodically cleaned.
The front panel can be cleaned with a soft cloth, using water and a delicate detergent (such as the ones used for
crockery) in diluted form.
Do not use alcohol, solvents or the ammonia-based products used for cleaning windows.
The steel surfaces can be cleaned with alcohol and various detergents.
If there are heavy incrustations, use a fine abrasive paste with an electric polisher and soft pads.
After this, normal detergent products can be used.
In places where strong acids are used (hydrochloric/sulphuric/nitric), it is advisable to clean the machine with a soft
cloth soaked in paraffin oil. This film will protect the steel from acid vapour aggression.
9.8

HOW TO SERVICE THE APPLIANCE

The user must call SMEG's authorized technicians at least once every 12 months (once every 6 months is better) for
preventive maintenance purposes and for the visual inspection required for safety reasons.
The technician must:
• replace all the tubes and cans containing liquids if necessary, since faults could arise if these parts are defective
• check the safety thermostats, the ground terminals and protection conductors, replacing any defective or worn
components if necessary.
All the replaced components must be supplied by SMEG or by one of SMEG's authorized centers.
Make sure that there is a clear area of at least 1m
maintenance/repair work.
Versione 22.10.08
Manual GW4090 - User
in front of the machine before proceeding with any
2
44