Smeg GW3060 User Manual page 24

If detergent spills out of the container it must be dried immediately.
The amount of detergent to dispense during a phase is programmed by means of the general programming
menu.
Consult the 'PROGRAMMING AND PROGRAM EDITING' chapter for further details about programming
and modifying the programs.
Recommended programming values *
PUMP P1 Alkaline detergent
PUMP P2 Acid neutralizer
Caustic soda (33% sol. approx)
PUMP P3
PUMP P4
• If necessary, the detergent dispensing values can be changed within the tolerated value range.
The accuracy of the dispensing system depends on the condition of the suction and delivery tubes: in the worst
case, the error will not exceed 5% of the measured quantity.
* The values to be entered are equivalent to the ml/lt
Versione 22.10.08
Manuale GW3060 - User
MODEL GW3060-GW4090
Dispenser settings
Product
Antifoam
value ap. ml/cycle
15-25 30 - 50
15-20 25 – 40
45-60 90 – 120
2-5 5-10
24