Smeg GW3060 User Manual page 41

79 PROGRAM NOT CONGRUENT
80 WARM WATER FLOWMETER FAILURE
81 DEMI WATER FLOWMETER FAILURE
82 SYSTEM FAILURE SOL.1
84 OVERTEMPERATURE TA1
86 PUMP P1 BLOCKED
87 PUMP P2 BLOCKED
88 PUMP P3 BLOCKED
89 PUMP P4 BLOCKED
91 ARCHIVE FULL
92 CHANGE FILTER
93 MAINTENANCE REQUEST
Versione 22.10.08
Manual GW4090 - User
41
if the fault persists.
Incongruent program error. Check the
settings of the required cycle.
Repeat the cycle. Call the Technical
Assistance Service if the fault persists.
Repeat the cycle. Call the Technical
Assistance Service if the fault persists.
Repeat the cycle. Call the Technical
Assistance Service if the fault persists.
Repeat the cycle. Call the Technical
Assistance Service if the fault persists.
Repeat the cycle. Call the Technical
Assistance Service if the fault persists.
Repeat the cycle. Call the Technical
Assistance Service if the fault persists.
Repeat the cycle. Call the Technical
Assistance Service if the fault persists.
Repeat the cycle. Call the Technical
Assistance Service if the fault persists.
Download the data from the archive.
Air filter replacement. Call the
Technical Assistance Service
Air filter replacement. Call the
Technical Assistance Service