Table of Contents
Advertisement
8.
ALARM MESSAGES
Different messages appear on the display if the appliance operates in a faulty way or water and/or detergent are
lacking. There are two different situations, depending on how serious the fault is:
. warning messages;
. true alarm signals.
In he first case, there will be a message allowing the user to ignore the warning and proceed with the selected cycle
while in the second case, the user must press the Reset button and comply with the relative procedure in order to
overcome the situation.
By and large, an alarm indicates that the machine is operating in a faulty way and needs to be repaired by a technician.
Sometimes, however, the alarm may be caused by a temporary situation. Before calling the authorized Technical
Assistance service you are therefore advised to make a Reset and repeat the cycle a second time. Call the authorized
Technician if the alarm persists.
The possible alarm messages are indicated below.
To release the machine when one of these messages appears, depress the RESET key
for a couple of seconds in order to activate the RESET cycle.
If a cycle has been stopped during a high temperature phase, remember that the temperature must
drop below 45°C before the door can be opened.
Versione 22.10.08
Manual GW4090 - User
37
Hide quick links:
Advertisement
Table of Contents
