Honda Civic Owner's Manual page 92

06/08/05 21:55:31 32SMG610_092
SEL/RESET
BUTTON
On vehicles with cruise control
In normal display mode, the upper
display shows the trip computer and
rear seat belt use when you turn the
ignition switch to the ON (II)
position (see page 90 ). Each time
you press the INFO button, the trip
computer changes from the current
fuel mileage to the estimated
distance, to the elapsed time, to the
average speed, to the average fuel
mileage, to the rear seat belt use and
INFO BUTTON
INFO
BUTTON
SEL/RESET
BUTTON
On vehicles without cruise control
then to no display as shown on the
next page.
When you turn the ignition switch to
the ON (II) position, what you last
selected is shown in the multi-
information display.
Multi-Information Display
If there is any system warning,
system warning symbol(s) will be
shown in the multi-information
display following the current fuel
mileage display. The system warning
symbol/message that has the
highest priority will be displayed first
when you turn the ignition switch to
the ON (II) position.
CONTINUED
Instruments and Controls
89