06/08/05 22:35:32 32SMG610_393
Lights
EXPANSION
TANK
Remove the coolant tubes from
the two clips and the over flow
tube from the expansion tank,
then remove the expansion tank
from its holder by pushing the tab
and pulling the tank straight up.
Make sure the engine and radiator
are cool.
390
Maintenance
COVER
2.
Remove the cover on the back of
the headlight assembly by turning
it anticlockwise.
BULB
3.
Remove the electrical connector
from the bulb by pulling the
connector straight back.
4.
Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.