Honda Civic Owner's Manual page 391

06/08/05 22:35:14 32SMG610_391
Lights
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
6. Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
7. Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock it in place.
8. Turn on the headlights to test the
new bulb.
9. On the left side of the 1.8 engine
model
Reinstall the secondary air intake
duct securely, then put the cover
back in place. Reinstall the two
fasteners and secure them by
pushing on the heads until they
lock, and put the cable back in
place.
388
Maintenance
Low Beam Headlights
(Petrol models)
Front
COVER
1. Open the bonnet.
2. Remove the cover on the back of
the headlight assembly by turning
it anticlockwise.
3. Remove the electrical connector
from the bulb by pulling the
connector straight back.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.