Honda Civic Owner's Manual page 405

06/08/05 22:37:19 32SMG610_405
Lights
5. Put the cover back in place and
install the electrical connector
securely.
6. Put the light assembly back into
the hole, rear side first. Push on
the front side until it snaps into
place.
402
Maintenance
Replacing a Glove Box Light Bulb
1. Open the glove box. Place a cloth
and pry the plastic lens carefully
with a small flat-tipped
screwdriver.
2. Remove the light assembly by
pulling it down.
3. Pull the bulb straight out of its
holder. Install the new bulb
straight into the holder until it
bottoms.
4. Turn on the position lights to
make sure the new bulb is
working.
5. Put the light assembly back in
place, then close the glove box.