Honda Civic Owner's Manual page 128

06/08/07 17:57:42 32SMG610_128
AUTO: The displayed measurements
of the trip computer in the multi-
information display correspond with
the speedometer display setting. The
display switches between ''km'' and
''miles.''
KM: The displayed measurements of
the trip computer in the multi-
information display do not
correspond to the speedometer
display switching. Always display
with ''km.''
MILES: The displayed
measurements of the trip computer
in the multi-information display do
not correspond to the speedometer
display switching. Always display
with ''miles.''
While the multi-information display
is showing ''DISPLAY UNIT,'' press
the SEL/RESET button. The display
changes to the setting display.
You can select ''AUTO,'' ''KM,'' or
''MILES''. Each time you press the
INFO button, the selected mode
switches between them. Enter your
selection by pressing the SEL/
RESET button.
Multi-Information Display
AUTO is selected.
When your selection is successfully
completed, the display shows the
appropriate setting; ''SETUP AUTO,''
''SETUP KM,'' or ''SETUP MILES''
for a few seconds, then goes back to
the ''CHG SETTING'' display. Press
the SEL/RESET button, then press
the INFO button repeatedly to select
another customizing mode.
CONTINUED
Instruments and Controls
125