The channel setting determines the physical RF channel used by the MōVI Controller's primary radio link. One of twelve channels in
CHANNEL
the 2.4GHz band can be chosen manually, or choose 0 (Automatic) to allow the MōVI Controller to automatically select the clearest
channel at startup. The channel selected must match the channel on the MōVI Controller Receiver.
MōVI CHANNEL
CENTER FREQUENCY [GHZ]
Auto-Selecting
0 (Auto)
1
2
3
4
5
6
7
8
9
A
B
C
D
1
E
1
F
1
These channels are reserved for low-power transmitters and are not available on the MōVI Controller.
1
The MōVI Controller can store up to 16 Device Groups. (This is akin to "model memory" on a standard RC transmitter.) Each device group
DEVICE GROUP
can have one or more MōVI Controller Receivers bound to it. This can be useful for selecting between multiple MōVI systems that are on at
the same time. For simple single MōVI use, the Device Group can be left at the default setting (0).
Configure the power level (from 10-18dBm) to ensure compliance with local RF regulations. Radios shipped outside of North America have
POWER LEVEL
only the EU (10dBm) option available. The range of the link has been tested at up to 300m line-of-sight at EU (10dBm) power.
REDROCK MICRO MICROREMOTE CHANNEL
2.410
2.415
2.420
2.435
2.430
2.435
2.440
2.445
2.450
2.455
2.460
2.465
N/A
N/A
N/A
N/A
1
2
3
4
5
6
7
8
9
A
B
C
N/A
N/A
N/A
HOCUS PRODUCTS AXIS 1 CHANNEL
N/A
1
2
3
4
5
6
7
8
9
10
11
12
N/A
N/A
N/A
Need help?
Do you have a question about the M?VI Controller and is the answer not in the manual?