Equipment Connections - Panasonic SC-HT290 Operating Instructions Manual

Equipment connections

Stereo connection cable
White (L)
Red (R)
Optical fiber cable (1 included)
Make sure that the power supply for all components has been turned
off before making any connections.
To connect equipment, refer to the appropriate operating in-
structions.
Peripheral equipment and cables sold separately unless other-
wise indicated.
Connecting the receiver, changer and TV
Dust cap
Receiver
DIGITAL IN
TV
MONITOR
OPTICAL1 OPTICAL2 COAXIAL
OUT
(TV) (DVD)
FM
ANT
75 Ω
IN
GND
CD TAPE TV
REC PLAY
(OUT) (IN)
LOOP
L
EXT
AM
ANT
R
Video connection cable
VIDEO
(included)
IN
TV or monitor
[A] CENTER, SURROUND (L/R) SUB-
WOOFER IN
Connect a DVD-Audio player with 6-channel
(5.1-channel) output here. When you do this, you
will have to disconnect the changer from the
FRONT terminals.
[B]
This connection is necessary if you intend to
record from the changer (á page 34) and to play
audio with high sampling frequencies (á page 25).
[C]
If you ever separate the changer from the receiver,
you can connect an active subwoofer here.
Optical fiber cable connection
³Do not bend the optical fiber cable.
³If the digital optical connector is not going to be used, be sure
to attach the dust cap to prevent exposure to dust.
Optical fiber cable (included)
Video connection cable
(included)
A B
VCR DVD/DVD 6CH Stereo connection
CENTER SURROUND
cable
IN
L
IN
R
SUBWOOFER
FRONT
OUT IN
L
R
º S VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the video output terminal
by separating the chrominance (C) and luminance (Y) signals.
(Actual results depend on the television.)
º COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference signals (P
luminance signal (Y) separately in order to achieve high fidelity in reproducing
colors.
³The description of the component video input terminals depends on the television
or monitor (e.g. Y/P
color.
³After making this connection, change the black level for a better picture
(á Video—Black Level Control, page 46).
Video connection cable (2 included)
S video cable
Do not connect the changer through your
video cassette recorder
The picture may not be played correctly due to the copy guard.
C
SUB-
WOOFER
AUDIO OUT
AC OUTLET
AC IN
S video cable
TV's S video
input terminal
Video connection cable
P terminal
R
P terminal
B
Y terminal
TV's component video
input terminals
/P , Y/B-Y/R-Y, Y/C
B R
Changer
P
OPTICAL R
VIDEO
L
OUT
R
P
B
S VIDEO
OUT
COMPONENT
DIGITAL
VIDEO OUT
AUDIO OUT
(PCM/
BITSTREAM)
S VIDEO
OUT
P
R
Y
P
B
/C ). Connect to terminals of the same
B R
AC IN
Y
/P ) and
B R
13
RQT5822