Making A Recording; Other Functions - Panasonic SC-HT290 Operating Instructions Manual

A
B
1
INPUT SELECTOR
B
TAPE MONITOR
C
TAPE MONITOR
D
MUTING
E
DIMMER
34
RQT5822
1
TAPE MONITOR
TAPE MONITOR
SOUND MODE CHANNEL VOLUME MUTING
MUTING
HELP SUBWOOFER
DIRECT TUNING/
TV VOL TV/VIDEO
DISC
1 2 3 DVD 6CH
4 5 6 DIGITAL
7 8 9
SFC
DISC ENTER/
0 /ENTER
DECK 1/2 DELAY
PLAY MODE ACTION CANCEL LEVEL
SUBTITLE AUDIO ANGLE
REPEAT A-B
DISC SKIP
MODE REPEAT
SEQUENTIAL
DISC INFO DIMMER TEST
MODE
DIMMER
DVD

Making a recording

Note
You cannot record a source connected through a digital terminal.
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analog terminals (á pages 13 and 16) and
"ANALOG" input is selected (á pages 20 and 25).
»
Recording on a tape deck or VCR
A
You can record to a tape deck connected to TAPE REC (OUT) or to a
VCR connected to VCR OUT.
See the recording unit's operating instructions for details on how to
prepare it for recording.
When recording with a tape deck, you can record any source except
TAPE.
When recording with a VCR, you can record any source except TAPE
or VCR.
1
Turn [INPUT SELECTOR] to select the
source to be recorded.
2
Begin recording.
Follow your recording unit's operating instructions.
3
Begin the source to be recorded.
Follow your equipment's operating instructions.
»
To monitor sound being recorded onto a tape
B
deck
It is possible to check the sound being recorded if your tape deck is a
3-head system.
Press [TAPE MONITOR] on the receiver
and set the monitor button on the tape
deck to "TAPE".
Press [TAPE MONITOR] once again to turn it off.

Other functions

»
Using the TAPE MONITOR
C
Use the tape monitor if you have connected a graphic equalizer to the
TAPE terminals.
Press [TAPE MONITOR].
The "TAPE MONITOR" indicator lights and the tape monitor comes
on.
Sources other than TAPE can still be selected with [INPUT
SELECTOR] while the "TAPE MONITOR" indicator is on.
Press [TAPE MONITOR] again to turn the tape monitor off.
(á See above for details on how to use the tape monitor during
recording.)
Note
³The tape monitor cannot be used when input is digital and turns off if
you select digital input.
³Depending on the setting, the graphic equalizer can cause distortion.
»
Muting the volume
D
Press [MUTING].
The message "MUTING ON NOW" runs repeatedly from right to left
across the display as long as the muting function is on.
To cancel
Press [MUTING].
Muting is also canceled when the receiver is turned off.
»
Dimming the receiver's display
E
Press [DIMMER].
To cancel
Press [DIMMER].