Panasonic dvd home theater sound system operating instructions (48 pages)
Summary of Contents for Panasonic SC-HT290
Page 1
QUICK SET UP GUIDE DVD Home Theater Sound System SC-HT290 For operation and other details with regard to each component, please refer to the operating instructions. Step Placement TV (not included) 3 Center speaker 1 Front speaker 2 Front speaker...
Page 2
SUBWOOFER CENTER SURROUND R SURROUND L FRONT R FRONT L Step SUBWOOFER CENTER SURROUND R SURROUND L FRONT R FRONT L Speaker cords Speaker stickers (1 sheet included) (6 included) Attach the stickers to the speaker cords About 10 cm (4") The 6 speaker cords are all same.
Page 3
Step Video connection cables Optical fiber cable (2 included) (1 included) Connect the receiver, changer and TV TV or monitor VIDEO Receiver TV MONITOR DVD/DVD 6CH DIGITAL IN OPTICAL2 (DVD) Changer VIDEO DIGITAL AUDIO Video connection cable V ID E O O U T O P T IC O N E N...
Step AM loop antenna set (1 set included) FM antenna (1 included) Connect the antennas FM antenna AM loop antenna Receiver Fix the other end of the Attach to the stand and place on a flat surface. antenna where reception is best.
Page 5
Check installation by playing a DVD Receiver Changer ∫ Other accessories See the operating instructions for more about these accessories. Speaker feet Batteries (2 included) Remote control (1 sheet included) (1 included)
Page 6
Preparations Turn on the television and select the appropriate video input on the television to suit the connections for the receiver and the changer. ● Use a DVD encoded with Dolby Digital. ● Press [POWER, Í/I] on the receiver and changer. POWER First switch on the receiver.