Panasonic SC-HT290 Operating Instructions Manual page 11

Free-standing
º Small speaker
Standing
º Big speaker
Attach these rubber feet to prevent vibration causing the speakers to
move or fall over.
One sheet of 25 rubber feet is included. Use 3 or 4 feet per speaker.
Note
³Set the speakers up on an even surface to prevent them from falling.
Take proper precautions to prevent the speakers from falling if you
cannot set them up on an even surface.
³Keep your speakers at least 10 mm (13/32q) away from the system
for proper ventilation.
Attaching to a wall
º To attach vertically
Rubber feet
(included)
Screw
Rubber feet
(included)
Lying down
30–35 mm
(1–3/16q to 1-3/8q)
7–9 mm
(9/32q to 23/64q)
106 mm
(4–11/64q)
Screw
Moving the brand badge
You can turn the brand badge if you want to set up the small speakers
horizontally.
Rotate the badge to the required position.
³The speaker nets cannot be removed.
Attaching to speaker stands
Ensure the following conditions are met when you purchase your
speaker stands.
³Screw; diameter: 5 mm, pitch: 0.8 mm, length: thickness of stand
plate plus between 7 and 10 mm.
Distance between the centers of the holes; 60 mm
³The stands must be able to support over 10 kC (22 lb).
³The stands must be stable even if the speakers are in a high position.
Attach the stands
with these holes.
º To attach horizontally
Screw
106 mm
(4–11/64q)
30–35 mm
(1–3/16q to 1–3/8q)
7–9 mm
(9/32q to 23/64q)
Note
Attach four rubber feet to each speaker, ensuring they do not cover the
holes. Screw the wood screw into a thick and hard part of the wall.
The surface you attach the speakers to must be able to support over
10 kC (22 lb). Consult your dealer for details.
5 mm, Pitch 0.8 mm
60 mm
(2–23/64q)
Speaker
stands
Plate thickness
plus 7 to 10 mm
(9/32q–25/64q)
Rubber feet
(included)
11
RQT5822