Panasonic SC-HT290 Operating Instructions Manual page 30

3, 4, 2, 1/
ENTER
2
2·3
1
1
PLAY MODE
PLAY MODE
PGM
CD
2
DIRECT TUNING/
PLAY MODE
DISC
1 2 3
4 5
PGM
CD
3
PLAY MODE
1 2 3
4 5 6
7 8 9
0 /ENTER
PGM
CD
4
PLAY
30
RQT5822
( )
TOP MENU MENU
ENTER
DISPLAY RETURN
SKIP SLOW /SEARCH
6, 5
4
STOP PAUSE PLAY
SOUND MODE CHANNEL VOLUME MUTING
HELP SUBWOOFER
DIRECT TUNING/
TV VOL TV/VIDEO
DISC
1 2 3 DVD 6CH
4 5 6 DIGITAL
7 8 9
SFC
DISC ENTER/
0 /ENTER
DECK 1/2 DELAY
PLAY MODE ACTION CANCEL LEVEL
CANCEL
SUBTITLE AUDIO ANGLE
REPEAT A-B
DISC SKIP
MODE REPEAT
SEQUENTIAL
DISC INFO DIMMER TEST
MODE
DVD
Choose a track, then press ENTER.
No Disc Track
1
SELECT
Press PLAY to start
ENTER RETURN
Choose a track, then press ENTER.
No Disc Track
1 5
1
SELECT
Press PLAY to start
ENTER RETURN
Choose a track, then press ENTER.
No Disc Track
1 5 23
2
SELECT
Press PLAY to start
ENTER RETURN
Disc No. Track No. Program No.
Changing the play sequence
Program play
[VCD] [CD]
Remote control only
You can select up to 32 items (tracks and discs) to play in the order
you choose.
1
While stopped
Press [PLAY MODE] until the program
play screen appears.
2
Press [DIRECT TUNING/DISC] and
[1]–[5] to select the disc.
3
Press the numbered buttons to select
the track.
³To select a 2-digit number
³Example: To select track 23, press [L/ENTER], then [2]
Play
³To enter the disc as one item, press [3, 4] to select "ALL"
Clear
and press [ENTER].
³Repeat steps 2 and 3 to enter other items.
Clear all
³To select tracks on the same disc, simply press the numbered
buttons to select the next track.
4
Press [1] (play).
Play now begins in the programmed sequence.
3
Note
³You can enter tracks and discs the unit cannot find, or DVDs, if the
unit has not read the disc, but these are cleared during play.
³You cannot enter non-existent items or DVDs if the changer has read
the disc.
³You can not start play by pressing [DIRECT TUNING/DISC] and
Play
[1]–[5] while in the program mode.
Clear
Clear all To select discs and tracks in step 2 and 3 using the cursor
buttons
Press [ENTER] and [3, 4] to select a disc, then press [ENTER].
Press [3, 4] to select a track and press [ENTER].
To add or change tracks
Press [3, 4] to select an available item, then repeat step 2 and 3.
3
To move to the page before or after the one shown
Press [6, 5].
To clear the programmed items one by one
Press [3, 4] to select the track and press [CANCEL].
(Alternatively you can select "Clear" and press [ENTER].)
Play
To clear the whole program
Clear
Move to "Clear all" with [3, 4, 2, 1] and press [ENTER].
Clear all
The whole program is also cleared when the unit is turned off.
To exit the program mode
Press [PLAY MODE] until the program play screen disappears.
³The program is retained in memory.
3
and [3].