Speaker set-up
»
Attach the stickers to the speaker cords
1
SUBWOOFER
CENTER
SURROUND R
SURROUND L
FRONT R
FRONT L
6
5
4
3
2
1
FRONT L
SUBWOOFER
CENTER
SURROUND R
SURROUND L
FRONT R
FRONT L
6
5
4
3
2
1
»
Connect the cords to the receiver
2
º Speaker cords
³Connect the cords so the numbers on the stickers match the num-
bers under the terminals.
³Connect the red cords to the red terminals (i) and the black cords to
the black terminals (j).
³Ensure the wires of the cords are fully inserted so they do not touch
each other and short circuit.
1
2
»
Connect the cords to the speakers
3
3 Center speaker
1 Front speaker
(left)
4 Surround speaker
(left)
Rear panel of small speakers
Rear panel of large speaker
Note
After you have completed set-up and connection, wind the excess
cord and keep together with string.
12
RQT5822
About 10 cm (4q)
1
3
2 Front speaker
(right)
30° 30°
6 Subwoofer
120°
5 Surround speaker
(right)
The 6 speaker cords are all the same.
Rear of receiver
SPEAKERS
SUB-
SURROUND CENTER
FRONT
WOOFER
R L
R L
+
–
Connect so the numbers on the stickers
match the numbers under the terminals.
The 5 small speakers are the same.
Connect the cords with stickers 1 to 5 attached to the small
speakers: 2kfront, 2ksurround, and 1kcenter.
Connect the cord with sticker 6 attached to the large
speaker: subwoofer.
Red
Black
Red
Black
Red
Black
+
–