Panasonic SC-HC37GN Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Stereo System
  5. SC-HC37GN
  6. Service manual

Panasonic SC-HC37GN Service Manual

Compact stereo system
Hide thumbs
Table of Contents

Advertisement

Quick Links

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
1.3. Before Repair and Adjustment ------------------------- 5
1.4. Protection Circuitry ---------------------------------------- 5
1.5. Caution For Fuse Replacement------------------------ 5
1.6. Safety Part Information----------------------------------- 6
2 Warning -------------------------------------------------------------- 7
2.2. Precaution of Laser Diode------------------------------- 8
3 Service Navigation ----------------------------------------------11
3.1. Service Information -------------------------------------- 11
4 Specifications ----------------------------------------------------12
5 General/Introduction -------------------------------------------13
5.1. Inserting or removing media ---------------------------13
Model No.
Product Color: (K)...Black Type (For GN/GS/GSX only)
PAGE
Operations ------------------------------------------------- 15
7 Installation Instructions -------------------------------------- 16
7.1. Connections ----------------------------------------------- 16
8 Service Mode ----------------------------------------------------- 17
8.1. Self Diagnostic Mode ----------------------------------- 17
8.3. Doctor Mode Table--------------------------------------- 19
8.4. Sliding Door Operation --------------------------------- 25
9 Service Fixture & Tools --------------------------------------- 26
10.1. Disassembly flow chart --------------------------------- 28
10.2. Types of Screws------------------------------------------ 29
10.3. Main Parts Location Diagram ------------------------- 29
10.5. Replacement of Door Assembly---------------------- 31
© Panasonic Corporation 2012. All rights reserved.
Unauthorized copying and distribution is a violation of
law.
Compact Stereo System
SC-HC37GN
SC-HC37GS
SC-HC37GSX
SC-HC37PU
(S)...Silver Type
(W)...White Type (For GS/GSX/PU only)
(R)...Red Type (For GN/GS/GSX only)
PSG1203017CE
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SC-HC37GN

Summary of Contents for Panasonic SC-HC37GN

  • Page 1: Table Of Contents

    10.3. Main Parts Location Diagram ------------------------- 29 5 General/Introduction -------------------------------------------13 10.4. Disassembly of Base Stand Assembly ------------- 30 5.1. Inserting or removing media ---------------------------13 10.5. Replacement of Door Assembly---------------------- 31 © Panasonic Corporation 2012. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 10.6. Replacement of Front Ornament Unit (L) & (R)--- 33 14.9. PANEL, INTERLOCK SWITCH, MOTOR & 10.7. Disassembly of Front Panel Block ------------------- 34 BUTTON CIRCUIT ------------------------------------- 110 10.8. Replacement of iPod Block ---------------------------- 36 14.10. SMPS CIRCUIT ----------------------------------------- 111 10.9.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

  • Page 4: Caution For Ac Cord (For Gs/Gsx)

    1.2. Caution for AC Cord (For GS/GSX)

  • Page 5: Before Repair And Adjustment

    1.3. Before Repair and Adjustment Disconnect AC power, discharge unit AC Capacitors as such C1702, C1710, C1725, C1727, and C1728 through a 10W, 1W resis- tor to ground. Caution : DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent.

  • Page 6: Safety Part Information

    1.6. Safety Part Information Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Exploded View & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.

  • Page 7: Warning

    2 Warning 2.1. Prevention of Electro Static Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...

  • Page 8: Precaution Of Laser Diode

    2.2. Precaution of Laser Diode CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Caution: This product utilizes a laser diode with the unit turned "on", invisible laser radiation is emitted from the pickup lens. Wavelength: 790 nm (CD) Maximum output radiation power from pickup: 100 μW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings:...

  • Page 9: Service Caution Based On Legal Restrictions

    2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).

  • Page 10: Handling Precaution For Traverse

    2.4. Handling Precaution for Traverse The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the Traverse. Cautions to Be Taken in Handling the Optical Pickup Unit 2.4.1.

  • Page 11: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 12: Specifications

    4 Specifications General Power consumption 25 W Power consumption in standby Approx. 0.2 W mode Power supply AC 110 V to 240 V, 50/60 Hz (GN only) AC 220 V to 240 V, 50 Hz Dimensions (W x H x D) 480 mm x 197 mm x 84 mm Depth without stand 75 mm Mass...

  • Page 13: General/Introduction

    5 General/Introduction 5.1. Inserting or removing media...

  • Page 14: Cd, Ipod/Iphone & Usb Playback Operations

    5.2. CD, iPod/iPhone & USB playback operations Compatibility CD, iPod/iPhone & USB • For compatibility of CD, iPod/iPhone & USB please refer to Operating Instructions.

  • Page 15: Location Of Controls And Components

    6 Location of Controls and Components 6.1. Main Unit & Remote Control Key Button Operations...

  • Page 16: Installation Instructions

    7 Installation Instructions 7.1. Connections...

  • Page 17: Service Mode

    8 Service Mode This unit is equipped with features of self diagnostic & doctor mode setting for checking the functions & reliability. 8.1. Self Diagnostic Mode Here is the procedures to enter into Self Diagnostic Mode. Step 1 : Turn on the unit. Step 2 : Select CD mode.

  • Page 18: Self Diagnostic Function Error Code

    8.2. Self Diagnostic Function Error Code 8.2.1. CD Mechanism Error Code Table Error Code Diagnostic Contents Description of error of error Automatic FL Display Remarks CD H15 CD Open Abnormal During operation Press [ ] on main unit for POS_SW_R On fail to be next error.

  • Page 19: Doctor Mode Table

    8.3. Doctor Mode Table Note : To enter the Doctor Mode, please use HC35 remote control. Here is the procedures to enter into Doctor Mode. Step 1 : Turn on the unit. Step 2 : Select CD mode. Step 3 : Pressing and hold [ ] on main unit then press [4] follow by [7] using the remote control. Step 4 : The display show as follow.
  • Page 20 8.3.2. Doctor Mode Table 2 Item Key Operation FL Display Front Key Mode Name Description FL Display Test To check the FL segments In Doctor Mode: display (All segments will Press [1] button on the remote control of HC35. light up) To cancel, press [0] button on remote control.
  • Page 21 8.3.3. Doctor Mode Table 3 Item FL Display Key Operation Mode Name Description Front Key CD Traverse Test To check for the traverse unit In Doctor Mode: ] follow by [1] & then [2] Mode operation. In this mode, the Press [ button on the remote control of HC35.
  • Page 22 8.3.4. Doctor Mode Table 4 Mode Name Description Front Key In Doctor Mode: Region Checking To check Region setting of Press [ ] follow by [1] & then [6] unit. button on the remote control of HC35. To cancel, press [0] button on remote Refer to 8.3.8 for the Region Setting destination control.
  • Page 23 8.3.5. Mecha Sliding Panel Reliability 8.3.6. CD Traverse Test (For CD)
  • Page 24 8.3.7. CD Combination Test (For CD) 8.3.8. Region Check Table (For Tuner) Region Model Series Country HC37 P/PC North America 2 (D) HC37 Japan Japan HC37 E. Europe HC37 EB/EG/EF/EC UK, Germany, France HC37 DBEB HC37 GT/GK/GS/PU S.E. Asia HC37 Oceania 8.3.9.

  • Page 25: Sliding Door Operation

    8.4. Sliding Door Operation 8.4.1. Basic Operation 1. The sliding open and close operation of the electric panel is done with [CD OPEN/CLOSE] key & [iPod OPEN/CLOSE] key on the main set or remote control. 2. The [CD OPEN/CLOSE] key & [iPod OPEN/CLOSE] key valid during standby condition. 3.

  • Page 26: Service Fixture & Tools

    9 Service Fixture & Tools Prepare service tools before process service position. Ref. No. Service Tools Remarks SFT1 Main P.C.B. (CN6006) - CD Servo P.C.B. (CN7002) REE1712 (30P FFC) SFT2 Main P.C.B. (CN1100) - SMPS P.C.B. (P1700) REX1538 (7P Wire)

  • Page 27: Disassembly And Assembly Instructions

    10 Disassembly and Assembly Instructions Caution Note: • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service manual) •...

  • Page 28: Disassembly Flow Chart

    10.1. Disassembly flow chart The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser- vicing. To assemble the unit, reverse the steps shown in the chart below.

  • Page 29: Types Of Screws

    10.2. Types of Screws 10.3. Main Parts Location Diagram...

  • Page 30: Disassembly Of Base Stand Assembly

    10.4. Disassembly of Base Stand Caution : During assembling, ensure a “tack” Sound is heard when the base Stand Assembly Is fully catch onto Assembly the rear Cabinet. Step 1 : Remove 2 screws. Step 2 : Remove the Base Stand Assembly.

  • Page 31: Replacement Of Door Assembly

    10.5. Replacement of Door Assem- 10.5.2. Assembly of Door Assembly Step 1 : Align the Door Assembly (Guiding Rib A) with the front panel (Guide Reel A) and Door Assembly (Guiding Rib B) with 10.5.1. Disassembly of Door Assembly the front panel (Guide Reel B). Step 2 : Gently slide the Door Assembly until it is fully closed.
  • Page 32 10.5.3. Disassembly of Idling Rack Caution : During assembling, insert the Idling Rack & ensure it is fully catched to the Door Assembly. • Refer to “Disassembly of Door Assembly” Step 1 : Slide the Idling Rack until it come to a stop. Step 2 : Gently using a Screwdriver to lift up the Idling Rack.

  • Page 33: Replacement Of Front Ornament Unit (L) & (R)

    10.6. Replacement of Front Orna- 10.6.2. Assembly of Front Ornament Unit ment Unit (L) & (R) Note : Front Ornament Unit (L) & (R) have the same mechani- Step 1 : Place the Front Ornament Unit (L) into the Speaker cal structure.

  • Page 34: Disassembly Of Front Panel Block

    Step 4 : Fix 3 screws. 10.7. Disassembly of Front Panel Block • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” Step 1 : Remove 8 screws. Step 2 : Release 3 catches on the Front Panel Block.
  • Page 35 Step 3 : Slightly lift up the Front Panel Block. Step 6 : Remove the Front Panel Block. Step 4 : Detach 14P FFC at the connector (CN941) on the Remote Sensor P.C.B.. Step 5 : Detach 5P wire at the connector (P944) on the Remote Sensor P.C.B..

  • Page 36: Replacement Of Ipod Block

    10.8. Replacement of iPod Block Step 3 : Push the iPod Block forward until it come to a stop. • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” •...
  • Page 37 Step 5 : Remove the iPod Block. 10.8.2. Assembly of iPod Block Step 1 : Insert the iPod Block from the front of Front Panel Assembly into the Guide as shown. Step 2 : Gently push in the iPod Block until it is fully fixed.
  • Page 38 Step 3 : Connect 5P wire at the connector (CN501) on the iPod Step 4 : Gently push the Slide Guide Pin upwards. A “click” P.C.B.. sound is heard when the Slide Guide Pin is fully catched. Caution : During assembling, dressed the 5P wire into the ribs of the Front Panel Block.
  • Page 39 10.8.3. Disassembly of iPod Support & Step 3 : Release the iPod Spring & remove the iPod Support. Caution : Keep the iPod Spring in safe place and place iPod Spring them back during assembling. • Refer to “Disassembly of iPod Block” Step 1 : Remove 2 screws.
  • Page 40 10.8.4. Disassembly of iPod Base 10.8.5. Disassembly of iPod P.C.B. • Refer to “Disassembly of iPod Block” • Refer to “Disassembly of iPod Block” • Refer to “Disassembly of iPod Support & iPod Spring” • Refer to “Disassembly of iPod Support & iPod Spring” •...

  • Page 41: Disassembly Of Interlock Switch P.c.b

    10.8.6. Disassembly of Cradle Key & iPod 10.9. Disassembly Interlock Tap Tray Switch P.C.B. • Refer to “Disassembly of iPod Block” • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of iPod Support & iPod Spring” • Refer to “Disassembly of Door Assembly” •...
  • Page 42 Step 2 : Release the 5P Wire from the slots. Step 3 : Remove 1 screw. Caution : During assembling, ensure the 5P wire is Step 4 : Release 1 catch. dressed into the slots of the Front Panel Block. Step 5 : Lift up the Interlock Switch P.C.B as shown.

  • Page 43: Disassembly Of Remote Sensor P.c.b

    Step 6 : Remove the Interlock Switch P.C.B.. 10.10. Disassembly of Remote Sensor P.C.B. • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” • Refer to “Disassembly of Front Panel Block” Step 1 : Release the wires from the slots.
  • Page 44 Step 2 : Detach 5P wire at the connector (P941) on the Remote Caution : During assembling, ensure that the 4P & 5P wires are dressed into the slots respectively. Sensor P.C.B.. Step 3 : Detach 4P wire at the connector (P942) on the Remote Sensor P.C.B..
  • Page 45 Step 4 : Using a Screwdriver to release 2 catches. Caution : During assembling, align the Remote Sensor P.C.B. (with white masking) with the catches & inserted Step 5 : Lift up the Remote Sensor P.C.B. as shown. into the front Panel Block.

  • Page 46: Replacement Of Gear Box Assembly

    Caution : During assembling, ensure the Remote Sensor 10.11. Replacement Gear P.C.B. is seated properly and fully catched. Assembly • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” •...
  • Page 47 Step 4 : Remove the Gear Box Assembly as shown. 10.11.2. Assembly of Gear Box Assembly Step 1 : Align the catch of the Gear Box Assembly with the guide on the Front Panel Block as shown. Step 2 : Slighly insert the Gear Box Assembly onto the Front Panel Block as shown.

  • Page 48: Disassembly Of Motor P.c.b

    Step 3 : Connect 4P wire at the connector (CN931) on the 10.12. Disassembly of Motor P.C.B. Motor P.C.B.. • Refer to “Disassembly of Gear Box Assembly” Step 4 : Dress the 4P Wire into the slot. Step 1 : Release 1 catch. Step 2 : Remove the Motor P.C.B.

  • Page 49: Disassembly Of Belt & Pulley Gear

    Step 4 : Desolder pins on the solder side of the Motor P.C.B. 10.13. Disassembly of Belt & Pulley and remove the Motor P.C.B.. Gear • Refer to “Disassembly of Gear Box Assembly” Step 1 : Remove the Belt. Step 2 : Remove the Pulley Gear.

  • Page 50: Disassembly Of Motor Assembly

    10.14. Disassembly of Motor Assem- Caution 1 : During assembling, align the Motor wire with the indicated arrow as shown. Caution 2 : During assembling, ensure the Motor Assembly is fully catched & seated properly. • Refer to “Disassembly of Gear Box Assembly” •...

  • Page 51: Disassembly Of Centering Spring & Centering Stopper

    10.15. Disassembly Centering Caution 1 : During assembling, placed the Centering Spring underneath the rib of the Centering Stopper. Spring & Centering Stopper Caution 2 : During assembling, placed the Centering Spring underneath the hook of the gear box assembly. •...
  • Page 52 Step 2 : Remove the Centering Spring. Step 4 : Remove the Centering Stopper. Caution : Keep the Centering Spring in safe place and Caution : During assembling, check the correct orientation place them back during assembling. before fixing the centering stopper. A "click" sound will be heard when fully catched.

  • Page 53: Disassembly Of Lever Spring, Trigger Lever & Driver Gear A

    10.16. Disassembly of Lever Spring, Caution 1 : During assembling, placed the Lever Spring underneath SW Lever Hook. Trigger Lever & Driver Gear A Caution 2 : During assembling, placed the Lever Spring underneath Trigger Lever Hook. • Refer to “Disassembly of Gear Box Assembly” •...

  • Page 54: Disassembly Of Sw Lever, Relay Gear & Driver Gear B

    Step 2 : Remove the Lever Spring. 10.17. Disassembly Lever, Caution : Keep the Lever Spring in safe place and place Relay Gear & Driver Gear B them back during assembling. • Refer to “Disassembly of Gear Box Assembly” • Refer to “Disassembly of Belt & Pulley Gear” •...
  • Page 55 Caution : During assembling, a “click” sound could be Step 5 : Remove the Driver Gear B. heard when the SW Lever is fully catched. Step 4 : Remove the Relay Gear.

  • Page 56: Disassembly Of Shutter & Shutter Spring

    10.18. Disassembly of Shutter & Shut- Step 2 : Upset the Front Panel Block. Step 3 : Remove the Shutter & Shutter Spring. ter Spring Caution : Keep the Shutter Spring in safe place and place them back during assembling. •...

  • Page 57: Disassembly Of Upper Guide Rail & Top Ornament

    10.19. Disassembly of Upper Guide Step 4 : Remove the Upper Guide Rail & the Top Ornament. Rail & Top Ornament • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” •...

  • Page 58: Disassembly Of Bottom Ornament

    10.20. Disassembly of Bottom Orna- Step 2 : Remove the Bottom Ornament. ment • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” • Refer to “Disassembly of Front Panel Block” Step 1 : Release two catches &...

  • Page 59: Disassembly Of Lower Guide Rail

    10.21. Disassembly of Lower Guide Step 3 : Release 2 catches. Caution : During assembling, ensure the Lower Guide Rail Rail is fully catched to the Front Panel Block. • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” •...

  • Page 60: Disassembly Of Smps P.c.b

    10.22. Disassembly of SMPS P.C.B. Caution : During assembling, a “click” sound could be heard when the SMPS unit is attached properly to the Main • Refer to “Disassembly of Base Stand Assembly” P.C.B.. • Refer to “Disassembly of Door Assembly” •...
  • Page 61 Step 5 : Lift up the Himelons. Step 7 : Gently push up the SMPS Shield Unit to release the Caution : Replace the Himelons if they are torn during dis- catches. assembling. Caution : During assembling, ensure that the SMPS Shield Unit is catched properly to the SMPS bracket as shown.
  • Page 62 Step 9 : Remove 3 screws. Caution : During assembling, ensure that the SMPS P.C.B. is properly seated on the locators. Step 10 : Remove the SMPS P.C.B..

  • Page 63: Replacement Of Diode (D1700)

    10.23. Replacement of Diode (D1700) Step 3 : Remove the Diode (D1700). • Refer to “Disassembly of SMPS P.C.B.” 10.23.1. Disassembly of Diode (D1700) Caution : Avoid touching the heatsink unit and SMPS P.C.B., due to its high temperature after prolonged use. Touching it may lead to injuries.

  • Page 64: Disassembly Of Panel P.c.b. & Button Ornament Unit

    10.23.2. Assembly of Diode (D1700) 10.24. Disassembly of Panel P.C.B. & Button Ornament Unit Step 1 : Apply grease to the heatsink unit. • Refer to “Disassembly of Base Stand Assembly” Step 2 : Fix the Diode (D1700) onto SMPS P.C.B.. •...

  • Page 65: Disassembly Of Button P.c.b

    Step 4 : Detach the Panel P.C.B. from the Button Ornament 10.25. Disassembly of Button P.C.B. unit. • Refer to “Disassembly of Base Stand Assembly” Step 5 : Remove the Panel P.C.B.. • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” •...

  • Page 66: Disassembly Of Button Ornament

    Step 3 : Remove the Button P.C.B.. 10.26. Disassembly of Button Orna- ment • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” • Refer to “Disassembly of Front Panel Block” •...

  • Page 67: Disassembly Of Cd Mechanism

    10.27. Disassembly of CD Mechanism Step 4 : Remove the CD Mechanism. • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” • Refer to “Disassembly of Front Panel Block” •...

  • Page 68: Disassembly Of Cd Servo P.c.b

    10.28. Disassembly Servo Step 2 : Lift up the Mecha Chassis & remove the Floating Springs. P.C.B. Caution : Keep the Floating Springs in safe place and place them back during assembling. • Refer to “Disassembly of CD Mechanism” Step 1 : Release catches and push down the fixed pins as arrow shown.
  • Page 69 Step 4 : Desolder points on the solder side of the CD Servo Step 8 : Attach short pin to the 24P FFC of the Traverse P.C.B.. Assembly. Step 9 : Remove the CD Servo P.C.B.. Step 5 : Upset the CD Servo P.C.B.. Step 6 : Lift up the Connector Cover.

  • Page 70: Disassembly Of Jack Lid

    10.29. Disassembly of Jack Lid Step 3 : Push the shaft of the Jack Lid inwards in the direction as shown. • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” •...

  • Page 71: Disassembly Of Main P.c.b

    Caution : During assembling, insert the shaft of the Jack 10.30. Disassembly of Main P.C.B. Lid into hole A, then press & push the shaft into hole B. • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” •...
  • Page 72 Step 3 : Remove 2 screws. Step 6 : Remove 4 screws. Step 7 : Release the 2P Cable Wire from the slots. Caution : During assembling, dressed the 2P cable wire into the slots. Step 8 : Slightly lift up the Main P.C.B.. Step 4 : Remove the Tuner Holder.
  • Page 73 Caution 1 : During assembling, ensure the Headphone Caution 2 : During assembling, align the Main P.C.B. with Jack (JK450) & USB Jack (JK6000) are inserted into the the locator & ensure it is properly seated. holes of Rear Cabinet Assembly as shown.

  • Page 74: Disassembly Of Passive Radiator (Sp3 & Sp4)

    10.31. Disassembly of Passive Radia- 10.32. Disassembly of Front Speaker tor (SP3 & SP4) (SP1) Note : Passive Radiator (SP3 & SP4) have the same mechani- • Refer to “Disassembly of Base Stand Assembly” cal structure. For disassembling of Passive Radiator (SP4), •...
  • Page 75 Step 3 : Remove 4 screws. Step 5 : Desolder the red (+) wire and black (-) wire at the ter- minals on the Front Speaker (SP1). Step 6 : Remove 4 screws. Step 4 : Lift up the Front Speaker Assembly (L) using a flat- head screw driver.
  • Page 76 Step 7 : Remove the Front Speaker (SP1). Caution 1 : During assembling, ensure the speaker wires is soldered properly. Check for dry joints. Caution 2 : During assembling, dressed the speaker wires into the slots.

  • Page 77: Disassembly Of Front Speaker (Sp2)

    10.33. Disassembly of Front Speaker Step 3 : Lift up the Front Speaker Assembly (R) using a Flat- head screw driver. (SP2) • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Front Ornament Unit” •...
  • Page 78 Step 5 : Remove 4 screws. Caution 1 : During assembling, ensure the speaker wires is soldered properly. Check for dry joints. Caution 2 : During assembling, dressed the speaker wires into the slots. Step 6 : Remove the Front Speaker (SP2).

  • Page 79: Disassembly Of Passive Radiator (Sp5)

    10.34. Disassembly of Passive Radia- 10.35. Disassembly of Passive Radia- tor (SP5) tor (SP6) • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Base Stand Assembly” • Refer to “Disassembly of Door Assembly” • Refer to “Disassembly of Door Assembly” •...

  • Page 80: Service Position

    11 Service Position Note: For description of the disassembly procedures, see the Section 10 11.1. Checking & Repairing of SMPS Step 7 : Place a Support Block to support the Front Panel Block as shown. P.C.B. Step 1 : Remove the Base Stand Assembly. Step 2 : Remove the Door Assembly.

  • Page 81: Checking & Repairing Of Panel P.c.b

    Step 10 : Place the SMPS P.C.B. on the Insulating Material. 11.2. Checking & Repairing of Panel Step 11 : Connect 7P extension cable (REX1538) from P1700 P.C.B. on the SMPS P.C.B. to CN1100 on the Main P.C.B.. Step 1 : Remove the Base Stand Assembly. Step 2 : Remove the Door Assembly.
  • Page 82 Step 8 : Use a tape to keep the centre switch (S643) pressed. Step 10 : Connect 14P FFC at the connector (CN941) on Remote Sensor P.C.B.. Step 11 : Connect 5P wire at the connector (P944) on Remote Sensor P.C.B.. Step 12 : Check and repair the Panel P.C.B.

  • Page 83: Checking & Repairing Of Cd Servo P.c.b

    11.3. Checking & Repairing of CD Step 8 : Remove 3 screws. Step 9 : Lift up the CD Mechanism. Servo P.C.B. Note : Insert CD before Checking the CD Servo P.C.B. Step 1 : Remove the Base Stand Assembly. Step 2 : Remove the Door Assembly.
  • Page 84 Step 11 : Remove the CD Mechanism. Step 13 : Connect 30P extension cable (REE1712) from CN6006 on the Main P.C.B. to CN7002 on the CD Servo P.C.B.. Step 14 : Use a tape to keep the centre switch (S643) pressed. Step 12 : Place the CD Mechanism on the Insulating Material.
  • Page 85 Step 15 : Place the Support Block to support the Front Panel Step 16 : Connect 14P FFC at the connector (CN941) on Block as shown. Remote Sensor P.C.B.. Step 17 : Connect 5P wire at the connector (P944) on Remote Sensor P.C.B.

  • Page 86: Checking & Repairing Of Main P.c.b. (Side B)

    11.4. Checking & Repairing of Main 11.5. Checking & Repairing of Main P.C.B. (Side B) P.C.B. (Side A) • Refer to (Step 1) - (Step 17) of item 11.3. Step 1 : Remove the Base Stand Assembly. Step 1 : Check and repair the Main P.C.B. (Side B) according to Step 2 : Remove the Door Assembly.
  • Page 87 Step 8 : Remove 3 screws. Step 11 : Remove the CD Mechanism. Step 9 : Slightly lift up the CD Mechanism. Step 10 : Detach 30P FFC at the connector (CN6006) on the Step 12 : Remove 4 screws. Main P.C.B..
  • Page 88 Step 14 : Gently lift up the SMPS Unit. Step 16 : Detach 2P wire at the connector (CN401) on the Main P.C.B.. Step 17 : Release the 2P wire from the slots. Caution : During assembling, dress the 2P wire into the slots.
  • Page 89 Step 19 : Remove the Tuner Holder. Step 23 : Remove the Main P.C.B. as shown. Step 20 : Remove 4 screws. Step 24 : Upset the Main P.C.B.. Step 21 : Release the 2P Cable Wire from the slots. Step 25 : Place the Main P.C.B.
  • Page 90 Step 27 : Connect 18P FFC at the connector (CN900) on the Step 30 : Place the CD Mechanism on the Support Block. Button P.C.B.. Step 31 : Connect 30P extension cable (REE1712) from CN6006 on the Main P.C.B. to CN7002 on the CD Servo P.C.B..
  • Page 91 Step 33 : Connect 14P FFC at the connector (CN941) on Remote Sensor P.C.B.. Step 34 : Connect 5P wire at the connector (P944) on Remote Sensor P.C.B.. Step 35 : Check and repair the Main P.C.B. (Side A) according to the diagram shown.

  • Page 93: Block Diagram

    CN7002 CN6006 CN6005 CN941 P942 CN931 TL931* VOTR+ CN7002 CN6006 CN6005 CN941 P942 CN931 TL932* VOTR- CN7002 CN6006 LDSW LDSW SWITCH 3.3V Q6004 NOTE: “ * ” REF IS FOR INDICATION ONLY SC-HC37GN/GS/GSX/PU SERVO & SYSTEM CONTROL (1/2) BLOCK DIAGRAM...

  • Page 94: Servo & System Control (2/2) Block Diagram

    TU SDA FL CE CN6007 CN900 CN901 CN6801 FL CE DAMP ERR FL CE 77 FL CS DAMP ERR DAMP ERR PDET2 PDET2 PDET2 (D AMP) TU INT TU INT TUN INT SC-HC37GN/GS/GSX/PU SERVO & SYSTEM CONTROL (2/2) BLOCK DIAGRAM...

  • Page 95: Ic Terminal Chart

    DQ2 / DQ13 5 / 46 DQ3 / DQ12 6 / 45 DQ4 / DQ11 8 / 43 DQ5 / DQ10 9 / 42 DQ6 / DQ9 11 / 40 12 / 39 DQ7 / DQ8 SC-HC37GN/GS/GSX/PU IC TERMINAL CHART...

  • Page 96: Audio Block Diagram

    DAMP RESET DAMP MUTE MUTE DAMP MUTE DAMP SLEEP SLEEP DAMP SLEEP CD IIS BCLK CD BCK CD IIS BCLK CD IIS LRCK CD IIS LRCK CD LRCK CD IIS SRDARA CD SDO CD IIS SRDATA SC-HC37GN/GS/GSX/PU AUDIO BLOCK DIAGRAM...

  • Page 97: Power Supply (1/2) Block Diagram

    NRST VOUT NRST ADJ 4 SERVO & SYSTEM CONTROL M VDET M VDET Q404 +18V POWER SUPPLY PW DAMP18V PW DAMP18V QR400 SWITCH QR401 SWITCH FROM SMPS CUT SMPS CUT SERVO & SYSTEM CONTROL SC-HC37GN/GS/GSX/PU POWER SUPPLY (1/2) BLOCK DIAGRAM...

  • Page 98: Power Supply (2/2) Block Diagram

    SERVO & SYSTEM CONTROL D3.3V CN6007 CN900 D3.3V D3.3V 3.3V D1101 CD SERVO P.C.B. CN6006 CN7002 5V,PW USB5V,PW iPod5V 13,14 17,18 CN6006 CN7002 PW 3R3V 3.3V 3.3V 3.3V 3.3V 7.5V CN6006 CN7002 7.5V 7.5V 7.5V 7.5V SC-HC37GN/GS/GSX/PU POWER SUPPLY (2/2) BLOCK DIAGRAM...

  • Page 99: Wiring Connection Diagram

    220V ~ 240V 50Hz (GN) 30 ... . .1 CAUTION RISK OF ELECTRIC SHOCK DOCK FOR iPod / iPhone AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B SC-HC37GN/GS/GSX/PU WIRING CONNECTION DIAGRAM...

  • Page 101: Schematic Diagram

    14 Schematic Diagram 14.1. Schematic Diagram Notes • Voltage and signal line (All schematic diagrams may be modified at any time with : +B Signal Line the development of new technology) : -B Signal Line Notes: : CD Audio Input Signal Line S641: ABN switch.

  • Page 103: Cd Servo Circuit (1/2)

    B1ADCF000001 C7152 R7208 C7230 LASER DRIVE 0.01 R7151 R7220 C7239 X7201 K7111 K7101 X7205 C7267 R7221 C7205 C7206 D7650 C7225 DZ2J056M0L 1000P C7226 DGND LDSW 1000P DGND1 SC-HC37GN/GS/GSX/PU NOTE: “ * ” REF IS FOR INDICATION ONLY CD SERVO CIRCUIT...

  • Page 104: Cd Servo Circuit (2/2)

    K7702 CD_IIS_LRCK CD_IIS_BCLK K7703 CD_IIS_BCLK DGND 3.3V LID_RIGHT LID_LEFT LDSW LID_RIGHT I2S OFF LID_LEFT PGND C7207 3.3V USB_SEL DGND K7258 IS2 OFF L7001 EXC24CE900U C7031 100P K7278 DVSS R7896 SC-HC37GN/GS/GSX/PU USB_SEL R7902 CD SERVO CIRCUIT USBDP_1 R7901 USBDM_1 R7903 R7904...

  • Page 105: Main Circuit (1/4)

    R420 R402 2.2K C415 C414 L404~L407 G1C1R0MA0530 C410 C411 C412 C413 L400~L403 LB400 J0JHC0000107 G1C150M00023 LB401 J0JHC0000107 C434 25V100 R451 C406 C407 C409 PDET2 TO MAIN CIRCUIT (3/4) SC-HC37GN/GS/GSX/PU NOTE: “ * ” REF IS FOR INDICATION ONLY MAIN CIRCUIT...

  • Page 106: Main Circuit (2/4)

    1000P R6105 100K R6112 IC6003 100K R6110 100K QR400 C0EBY0000861 R6111 100K B1GBCFNN0038 RESET SWITCH R453 QR400 QR401 C417 1000P QR401 D6001~D6002 R442 B1GDCFJJ0041 DA2J10100L SWITCH Q404 Q404 B1CHRD000051 SMPS_CUT +18V POWER SUPPLY TO MAIN CIRCUIT (4/4) SC-HC37GN/GS/GSX/PU MAIN CIRCUIT...

  • Page 107: Main Circuit (3/4)

    5.6K AM ANT AM ANT AM ANT 4.7K 4.7K CN6002 Q6006 REMOTE SENSOR DGND R6142 B1ADCF000001 CIRCUIT (P944) 4.7K SC-HC37GN/GS/GSX/PU Q6007 IN SCHEMATIC B1ADCF000001 R6141 MAIN CIRCUIT DIAGRAM - 7 4.7K NOTE: “ * ” REF IS FOR INDICATION ONLY...

  • Page 108: Main Circuit (4/4)

    +3.3V VOLTAGE REGULATOR 4700P G1101* G1106* R1107 R1129 100K C1120 R1130 C1122 LB1106 J0JHC0000107 G1107* VOUT IC1102 C0DBEYY00146 +3.3V VOLTAGE REGULATOR C1123 G1105* C1125 2200P 1000P RL1100* 3 21 SC-HC37GN/GS/GSX/PU MAIN CIRCUIT ZJ1100 NOTE: “ * ” REF IS FOR INDICATION ONLY...

  • Page 109: Ipod & Remote Sensor Circuit

    AUDIO_RETURN VREF- DIAGRAM - 8 iPod_DET_1 L503 G2 G4 J0JGC0000071 P942 POSITION (L) MOTOR CIRCUIT VREF- (CN931) IN SCHEMATIC DIAGRAM - 8 P945 DGND iPod CIRCUIT (CN501) IN SCHEMATIC iPod_5V DIAGRAM - 7 iPod_DET SC-HC37GN/GS/GSX/PU iPod / REMOTE SENSOR CIRCUIT...

  • Page 110: Panel, Interlock Switch, Motor & Button Circuit

    CN901 CLOSE FL_CE FL_CL FL_DI D3.3V PANEL CIRCUIT VP_GND VREF- (CN6801) FL_CE IN SCHEMATIC FL_CL FL_DI DIAGRAM - 8 SC-HC37GN/GS/GSX/PU D3.3V VREF- PANEL / INTERLOCK SWITCH / MOTOR / BUTTON CIRCUIT NOTE: “ * ” REF IS FOR INDICATION ONLY...

  • Page 111: Smps Circuit

    R1728 8.2K B1ABGC000001 B1GBCFJJ0051 IC1701 PCONT SWITCH STANDBY CONTROL C0DBZMC00006 C1701 SHUNT REGULATOR C1708 R1718 50V10P 1000P R1725 R1729 R1730 R1727 100K C1716 6.8K 0.01 C1704 1000P ZJ1702 SC-HC37GN/GS/GSX/PU NOTE: “ * ” REF IS FOR INDICATION ONLY SMPS CIRCUIT...

  • Page 112: Printed Circuit Board

    R7331 C7626 C7339 C7338 D7342 R7336 TP36 C7031 TP39 L7336 C7334 IC7002 TP10 TP11 K7278 TP37 M7301* (SPINDLE MOTOR) 3567A-1 3567A-1 3567A-1 3567A-1 (SIDE A) (SIDE B) NOTE: " * " REF IS FOR INDICATION ONLY SC-HC37GN/GS/GSX/PU CD SERVO P.C.B.

  • Page 113: Main P.c.b. (Side A)

    R6124 IC6004 G1104* C424 G1105* LB51 R1104 G1103* R6023 C6049 R6022 C1115 C1113 G1107* R6105 R1127 C1001 R1128 R6020 ...GC/GS/GSX/PU LB6030 C6050 LB1101 C1125 3523AA-1 3523AA-1 (SIDE A) SC-HC37GN/GS/GSX/PU NOTE: " * " REF IS FOR INDICATION ONLY MAIN P.C.B.

  • Page 114: Main P.c.b. (Side B)

    AM ANT Q6004 LB1103 R6011 CN6006 LB1102 ZJ1100 R6006 R6009 Q6006 R6005 IC6001 T6001 JK52 Q6007 R6144 RL1100* CN6005 R6141 3523AA-1 3523AA-1 R6142 CN6002 Q6005 CN1100 (SIDE B) SC-HC37GN/GS/GSX/PU NOTE: " * " REF IS FOR INDICATION ONLY MAIN P.C.B.

  • Page 115: Ipod & Remote Sensor P.c.b

    3523AC-1 3523AC-1 3523AC-1 3523AC-1 DOCK FOR iPod / iPhone (SIDE A) (SIDE B) REMOTE SENSOR P.C.B. (REP4775FD) P944 CN941 P945 P941 P942 R942 IR941 C941 3523AD-1 3523AD-1 3523AD-1 3523AD-1 SENSOR (SIDE A) (SIDE B) SC-HC37GN/GS/GSX/PU iPod / REMOTE SENSOR P.C.B.

  • Page 116: Panel, Interlock Switch & Motor

    (BLACK) (RED) IC6801 LOADING MOTOR* C6820 3526AA 3526AA INTERLOCK SWITCH P.C.B. (REP4776AC) S642 S644 (RIGHT) (INTERLOCK) P641* S643 (CENTER) S641 (ABN) 3526AC 3526AC SC-HC37GN/GS/GSX/PU NOTE: " * " REF IS FOR INDICATION ONLY PANEL / INTERLOCK SWITCH / MOTOR P.C.B.

  • Page 117: Button & Smps P.c.b

    ...GN QR1700 T2A 250V K1701 C1712 50Hz R1706 PC1701 R1702 C1715 Q1701 CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B SC-HC37GN/GS/GSX/PU NOTE: " * " REF IS FOR INDICATION ONLY BUTTON / SMPS P.C.B.

  • Page 119: Appendix Information Of Schematic Diagram

    IC7001 REF NO. MODE CD PLAY IC7001 REF NO. MODE CD PLAY IC7002 REF NO. MODE CD PLAY IC7002 REF NO. MODE CD PLAY IC7502 REF NO. MODE CD PLAY IC7704 REF NO. MODE CD PLAY SC-HC37GN/GS/GSX/PU CD SERVO P.C.B.
  • Page 120 16.1.2. CD SERVO P.C.B. (2/2) IC7704 REF NO. MODE CD PLAY IC7704 REF NO. MODE CD PLAY IC7851 REF NO. MODE CD PLAY Q7601 REF NO. MODE CD PLAY SC-HC37GN/GS/GSX/PU CD SERVO P.C.B.
  • Page 121 IC1100 REF NO. MODE POWER ON 17.0 STANDBY 17.0 IC1101 REF NO. MODE POWER ON 9.2 16.5 STANDBY 16.5 IC1102 REF NO. MODE POWER ON 17.0 17.0 STANDBY 17.0 17.0 IC1103 REF NO. MODE POWER ON STANDBY SC-HC37GN/GS/GSX/PU MAIN P.C.B.
  • Page 122 CD PLAY STANDBY IC6002 REF NO. MODE CD PLAY STANDBY IC6002 REF NO. MODE CD PLAY STANDBY IC6003 REF NO. MODE CD PLAY STANDBY IC6004 REF NO. MODE CD PLAY STANDBY IC6005 REF NO. MODE CD PLAY STANDBY SC-HC37GN/GS/GSX/PU MAIN P.C.B.
  • Page 123 QR1100 MODE POWER ON STANDBY QR6001 REF NO. MODE POWER ON STANDBY SC-HC37GN/GS/GSX/PU MAIN P.C.B. 16.1.6. PANEL P.C.B. IC6801 REF NO. MODE POWER ON -26.8 -26.8 -24.5 -15.4 -17.7 -20.0 -24.6 STANDBY -26.8 -26.8 -24.5 -15.4 -17.7 -20.0 -24.6 IC6801 REF NO.
  • Page 124 16.1.8. Waveform Chart 0.1Vp-p(200usec/div) 2Vp-p(20nsec/div) 2.2Vp-p(20nsec/div) 1.4Vp-p(5usec/div) 2.8Vp-p(5usec/div) 3.8Vp-p(50nsec/div) 3Vp-p(50nsec/div) 1.1Vp-p(10usec/div) 2.1Vp-p(10usec/div)

  • Page 125: Illustration Of Ic's, Transistors And Diodes

    16.2. Illustration of IC’s, Transistors and Diodes C0DBAYY01462 (8P) C0DBGYY01843 MN6627947RD (144P) C0GBY0000117 (30P) C1AB00003801 (14P) RFKWMHC37EG (100P) C3ABMY000027 (50P) C0HBB0000057 (44P) C3EBEY000037 (8P) C3EBFY000029 (8P) C0DBZMC00006 (4P) No.1 C0JBAR000586 (14P) No.1 C0DBEYY00146 MFI337S3959 C0EBY0000861 C0DACYY00012 C1AB00003566 C1AB00003800 (48P) C0CBCAC00358 C0DBZYY00483 C0DBZYY00381 No.1...

  • Page 126: Terminal Function Of Ic's

    16.3. Terminal Function of IC’s 16.3.1. IC6002 (RFKWMHC37EG) MICRO PROCESSOR IC Pin No. Mark Function MODEL_SEL MODEL SELECTION Pin No. Mark Function AP_RESET AIRPLAY RESET (FOR HC57 DAMP_RST DAMP RESET ONLY) DAMP_SLEEP DAMP SLEEP MODE AP_V1R2_ON NO CONNECTION (FOR HC57 DAMP_MUTE DAMP MUTING ONLY)

  • Page 127: Exploded View And Replacement Parts List

    17.1. Exploded View and Mechanical replacement Parts List 17.1.1. Cabinet Parts Location *TL932 (MOTOR P.C.B.) *TL931 CN931 S931 S644 S641 S643 CN501 S642 *P641 (INTERLOCK SWITCH P.C.B.) (iPod P.C.B.) CN502 21-1 P942 P944 (REMOTE SENSOR P.C.B.) P945 P941 CN941 IR941 SC-HC37PU-S/W SC-HC37GN-K/R/S/W SC-HC37GS-K/R/S/W SC-HC37GSX-K/R/S/W CABINET DRAWINGS...
  • Page 128 (CD SERVO P.C.B.) CN7001 S7201 ZJ1701 T1700 (SMPS P.C.B.) CN7002 P1700 ZJ1702 P1751 33-1 33-1 33-1 33-1 *HEATSINK UNIT A SC-HC37PU-S/W SC-HC37GN-K/R/S/W SC-HC37GS-K/R/S/W SC-HC37GSX-K/R/S/W NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY. CABINET DRAWINGS...
  • Page 129 (FOR GS/GSX/PU ONLY) SAFETY HOLDER AC CORD (FOR GN ONLY) WALL MOUNT BRACKET SCREW AC CORD(3 PIN) (FOR GS/GSX ONLY) AC PLUG ADAPTOR AC CORD (FOR GS/GSX ONLY) AM LOOP ANTENNA SC-HC37GN/GS/GSX/PU SC-HC37PU-S/W POLYFOAM (LEFT) SC-HC37GN-K/R/S/W SC-HC37GS-K/R/S/W POLYFOAM (RIGHT) SC-HC37GSX-K/R/S/W PACKAGING DRAWINGS...
  • Page 131 17.1.3. Mechanical Replacement Parts List Safety Ref. No. Part No. Part Name & Qty Remarks Description Safety Ref. No. Part No. Part Name & Qty Remarks RFKGHC37P-KL FRONT ORNAMENT K, R, S Description UNIT L RFKGHC37-WL FRONT ORNAMENT CABINET AND UNIT L CHASSIS RFKGHC37P-KR...
  • Page 132 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description RYP1766D-W BUTTON ORNAMENT RMG0730-G FLOATING RUBBER UNIT RMQ2020 MIDDLE CHASSIS RGQ0646-K SHUTTER XTN2+6GFJ SCREW RGQ0647-K I-POD BASE RGQ0648-K SLIDE GUIDE PIN PACKING MATERI- RGQ0649-K...

  • Page 133: Electrical Replacement Parts List

    17.2. Electrical Replacement Parts List Safety Ref. No. Part No. Part Name & Qty Remarks Description Safety Ref. No. Part No. Part Name & Qty Remarks IC7002 C0GBY0000117 Description IC7502 MFI337S3959 IC7704 C3ABMY000027 PRINTED CIR- IC7851 C3EBFY000029 CUITS BOARDS TRANSISTORS PCB1 REP4781A CD SERVO P.C.B.
  • Page 134 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description D1112 DZ2J062M0L DIODE G1CR18JA0020 INDUCTOR D1113 DZ2J110M0L DIODE G2A380Y00002 ANTENNA COIL D1114 DZ2J062M0L DIODE L400 G1C150M00023 INDUCTOR D1700 B0ABSM000008 DIODE L401...
  • Page 135 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description PHOTO COUPLER D0GB222JA008 2.2K 1/10W D0GB222JA008 2.2K 1/10W PC1701 B3PBA0000503 PHOTO COUPLER R401 D0GB222JA008 2.2K 1/10W R402 D0GB222JA008 2.2K 1/10W R403...
  • Page 136 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description R913 D0GB222JA008 2.2K 1/10W R6045 D0GB101JA008 1/10W R914 D0GB332JA008 3.3K 1/10W R6046 D0GB101JA008 1/10W R921 D0GB472JA008 4.7K 1/10W R6047 D0GB102JA008 1/10W...
  • Page 137 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description R6143 D0GB562JA008 5.6K 1/10W C403 F1H0J1060002 10uF 6.3V R6144 D0GB222JA008 2.2K 1/10W C404 F1H1A105A028 R6318 D0GB101JA008 1/10W C405 F1H0J1060002 10uF 6.3V...
  • Page 138 Safety Ref. No. Part No. Part Name & Qty Remarks Safety Ref. No. Part No. Part Name & Qty Remarks Description Description C1120 F1H0J4750005 4.7uF 6.3V C7151 F1H1C104A120 0.1uF C1121 F2A1E1010099 100uF C7152 F1G1A1040006 0.1uF C1122 F1J1E4750002 4.7uF C7154 F1H1C104A120 0.1uF C1123 F1H1H222A219...
  • Page 139 Safety Ref. No. Part No. Part Name & Qty Remarks Description SFT2 REX1538 7P WIRE (MAIN - SMPS) IPSG1203...

This manual is also suitable for:

Sc-hc37gsxSc-hc37puSc-hc37gs

Table of Contents