Table of Contents
Advertisement
4. Press the MENU key and open the "DATA" menu.
5. Set the sampling interval to "1s".
Move the cursor to "Sampling" and then select "1s".
Move the cursor to "Sampling" and then select "1s".
Move the cursor to "Sampling" and then select "1s".
6. Set the Data Capture Destination to "Internal memory".
Here the "TEST" folder is created in the Internal memory device, and then
destination for the captured data is set to the TEST folder.
(1) Move the cursor to the File Name parameter and then press the ENTER key.
(2) Move the cursor to the <MEM> item in the following screen, press the ENTER key.
(2) Move the cursor to the <MEM> item in the following screen, press the ENTER key.
(3) The file settings box shown in the following screen opens. This box is used to specify
(3) The file settings box shown in the following screen opens. This box is used to specify
file names for the GL220's internal memory and for the USB memory device.
file names for the GL220's internal memory and for the USB memory device.
file names for the GL220's internal memory and for the USB memory device.
(4) Move the cursor to <MEM> and then press the
(4) Move the cursor to <MEM> and then press the
Press
the key to move the cursor to
(5) A text input box is displayed. Let's create a folder named "TEST".
Input "TEST", move the cursor to
Note: <USB1> is displayed
when USB memory is
installed.
key.
key.
and then press the ENTER key.
Text input box
Select the text type; delete; insert; confirm
Select the character
, and then press the ENTER key to enter your setting.
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the midi LOGGER GL220 and is the answer not in the manual?