Cisco Codec C60 Administrator's Manual page 70

Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40
Contents Introduction
Video Output HDMI [1] Resolution
Select the preferred resolution for the monitor connected to the video output HDMI connector. This
will force the resolution on the monitor.
Requires user role: ADMIN
Value space: <Auto/640_480_60/800_600_60/1024_768_60/1280_1024_60/1280_720_5
0/1280_720_60/1920_1080_50/1920_1080_60/1280_768_60/1360_768_60/1366_768_6
0/1600_1200_60/1920_1200_60>
Auto: The system will automatically try to set the optimal resolution based on negotiation with
the connected monitor.
Range: 640x480@60p, 800x600@60p, 1024x768@60p, 1280x1024@60p, 1280x720@50p,
1280x720@60p, 1920x1080@50p, 1920x1080@60p, 1280x768@60p, 1360x768@60p,
1366x768@60p, 1600x1200@60p, 1920x1200@60p
Example: Video Output HDMI 1 Resolution: 1920_1080_60
Video Output DVI [2] MonitorRole
The DVI monitor role describes what video stream will be shown on the monitor connected to the
video output DVI-I connector. Applicable only if the "Video > Monitors" configuration is set to dual.
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly>
First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Example: Video Output DVI 2 MonitorRole: Second
Video Output DVI [2] OverscanLevel
Some TVs or other monitors may not display the whole image sent out on the systems video
output, but cuts the outer parts of the image. In this case this setting can be used to let the system
not use the outer parts of video resolution. Both the video and the OSD menu will be scaled in this
case.
Requires user role: ADMIN
Value space: <Medium/High/None>
Medium: The system will not use the outer 3% of the output resolution.
High: The system will not use the outer 6% of the output resolution
None: The system will use all of the output resolution.
Example: Video Output DVI 2 OverscanLevel: None
D14636.06 Profile C60-C40 and Codec C60-C40 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings
Video Output DVI [2] Resolution
Select the preferred resolution for the monitor connected to the video output DVI-I connector. This
will force the resolution on the monitor.
Requires user role: ADMIN
Value space: <Auto/640_480_60/800_600_60/1024_768_60/1280_1024_60/1280_720_5
0/1280_720_60/1920_1080_50/1920_1080_60/1280_768_60/1360_768_60/1366_768_6
0/1600_1200_60/1920_1200_60>
Example: Video Output DVI 2 Resolution: 1024_768_60
Video Output Composite [3] MonitorRole
NOTE: This command is not supported on Codec C40.
The Composite monitor role describes what video stream will be shown on the monitor connected
to the video output Composite connector. Applicable only if the monitor configuration is set to dual.
Requires user role: ADMIN
Value space: <First/Second/PresentationOnly>
Example: Video Output Composite 3 MonitorRole: First
Video Output Composite [3] OverscanLevel
NOTE: This command is not supported on Codec C40.
Some TVs or other monitors may not display the whole image sent out on the systems video
output, but cuts the outer parts of the image. In this case this setting can be used to let the system
not use the outer parts of video resolution. Both the video and the OSD menu will be scaled in this
case.
Requires user role: ADMIN
Value space: <Medium/High/None>
Example: Video Output Composite 3 OverscanLevel: None
70
Password protection
Auto: The system will automatically try to set the optimal resolution based on negotiation with
the connected monitor.
Range: 640x480@60p, 800x600@60p, 1024x768@60p, 1280x1024@60p, 1280x720@50p,
1280x720@60p, 1920x1080@50p, 1920x1080@60p, 1280x768@60p, 1360x768@60p,
1366x768@60p, 1600x1200@60p, 1920x1200@60p
First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Medium: The system will not use the outer 3% of the output resolution.
High: The system will not use the outer 6% of the output resolution
None: The system will use all of the output resolution.
Administrator guide
Appendices Contact us
www.cisco.com