Understanding Display Features - Fluke 867B User Manual

Understanding Display Features

Figure 3-3 illustrates typical display features. You will
encounter Primary and Secondary Displays and the
Graphical Window in Combo, Meter, and Trend Display
Modes. Other display features will appear in all display
modes.
Input Connections Screen
When you select a new function, the Input Connections
Screen (Figure 3-2) appears momentarily to identify
measurement connections to use, and displays modes
that are available. (You can press 5 "Exit" during this
3-second pause to proceed immediately to the function
display.) See Table 3-1 under Input Connections.
Primary Display
Large digits represent the measurement or test based on
the selector position. This display always appears in
Meter, Combo, and Trend modes. The frequency reading
(usually Hz) can be swapped into the primary display.
When selected, "Rel" or "dB" automatically occupy the
primary display.
Some General Descriptions
Understanding Display Features
Combo Meter View
1 2 3
Figure 3-2. Input Connections Screen
Secondary Display
Smaller digits show the type of frequency reading (usually
Hz) selected with the Frequency Softkeys. The primary
reading can also be swapped into this display.
Graphical Window
This window shows a waveform in Combo Mode, an
analog display in Meter Mode, or a plot in TrendGraph™
Mode.
3
Trend Exit
4 5
rita0601.eps
3-7