Using The Hardkeys; Introduction; Using Display Mode Softkeys - Fluke 867B User Manual

Introduction

Hardkeys can be used in many function and display
mode combinations. Although hardkeys are
mentioned throughout this manual, this chapter
provides a single source of detailed descriptions for
using hardkeys and their accompanying softkeys.

Using Display Mode Softkeys

Press d at any time. The Display Mode Softkeys
appear, showing the modes available with the
present measurement function. Modes available with
VAC, VDC, mV DC, A, and mAμA are shown.
Combo Meter View
The GMM test tool now highlights the present
selection and allows you to do the following:
•
•
Combo (the default mode set at the factory) appears
automatically when the selector is set to VAC, VDC,
mV DC, Amps, or mAμA. You can also select Meter
as the default for these functions on the SET UP
screen. Meter is the only mode available for Diode
Trend Exit
and Capacitance Test. Meter and Trend are the

Using the Hardkeys

Change display mode. Softkeys for the new
display mode now appear.
Return without changing the display mode.
Press d again, or press the softkey for the
selected display mode, or press 5 to exit.
Chapter 4
4-1