Introduction
This chapter contains instructions for using the
Save/Print key to save, recall, and print GMM test
tool display information and the SET UP selector
position to change the GMM test tool power-up
configuration.
Refer to Figure 6-1 for an overview of operations
accessible through the Save/Print key.
For Model 867B, refer to Figure 6-2 for instructions
on connecting a printer or PC to the GMM test tool.
Using Save, Recall, Print, and Set Up
Using the Save/Print Softkeys
Pressing P stops waveform and numerical value
updates, freezing the screen. Display contrast is
reversed, the "Freeze" message appears, and the
Save/Print Softkeys are accessed. You can now
Print display information or save and recall display
and configuration information.
If on, the "Enable RS232" feature (used in Trend
Mode) is canceled. Otherwise, active Touch Hold,
Min Max, Trend, and "Peak Hold" features continue
to update in the background (beeps continue).
Chapter 6
6-1