Table of Contents
Advertisement
867B/863
Users Manual
Number
Example
Frequency
F
11
Key
Display
d
12
Mode Key
RS-232
13
Optical Port
Battery
B
14
Eliminator
Connection
Calibration
15
Seal
3-6
Table 3-1. General Features (cont)
Name
Swaps primary and secondary displays. The frequency measurement type
(usually Hz) now occupies the primary display and the Frequency Softkeys
are active. You can now select a different frequency type with the softkeys.
Press F again to swap the primary and secondary displays back,
retaining the most recent frequency type.
Press to access the Display Mode Softkeys at any time. For volts and
amps functions, you can now select Combo, Meter, View, or Trend. Ohms
offers Meter or Trend. Other selector functions offer only Meter, while
LOGIC, COMPONENT Test, and SET UP use their own unique display
modes.
Connect the RS-232 serial interface cable here for communications with a
PC or printer.
Connect the battery eliminator for ac operation. A NiCd battery pack
installed in Model 867B charges whenever the battery eliminator is
connected.
Do not open this protective seal. Refer to the Service Manual.
Description
Hide quick links:
Advertisement
Table of Contents
