Setting Continuous Bake Or 12 Hour Energy Saving; Setting Kitchen Timer - Electrolux Built-in Wall Oven Service Manual

12
Section B - Electronic Controls

SETTING CONTINUOUS BAKE OR 12 HOUR ENERGY SAVING

The
Energy Saving features. The oven control has a factory preset built-in 12 Hour
Energy Saving feature that will shut off the oven if the oven control is left on for
more than 11 hours and 59 minutes. The oven can be programmed to override
Figure 1
this feature for Continuous Baking.
To set the control for Continuous Bake or 12 Hour Energy Saving
1. Press and hold
Figure 2
appear in the display and the control will beep once.
2. Press
continuous bake features. Note: "12Hr" in the display indicates the control is
Figure 3
set for the 12 Hour Energy Saving mode and "- -Hr" indicates the control is
set for the Continuous Bake feature (Figures 2 and 3).
3. Press
Figure 4
day) or press
SETTING THE KITCHEN TIMER
The or
kitchen that will beep when the set time has run out. It does not start or stop cooking. The
Timer feature can be used during any of the other oven control functions.
To set the Timer (example for 5 minutes):
1. Press
2. Press the number pads to set the desired time in the display (example
Figure 5
(Figure 6). Note: If
time of day.
Figure 6
3. When the set time has run out, "End" will show in the display (Figure 7).
The clock will sound with 3 beeps every 15 seconds until
pressed.
Figure 7
To cancel the Timer before the set time has run out:
Press
or and or pads control the Continuous Bake or 12 Hour
or for 8 seconds (Figure1). "12Hr" or "- -Hr" will
or to switch between the 12 Hour Energy Saving and
or to accept the change (Figure 4; display will return to time of
or to reject the change.
pad controls the Timer feature. The Timer serves as an extra timer in the
or . "0:00" will appear in the display (Figure 5).
). Press or . The time will begin to count down with "5:00"
or
or . The display will return to the time of day.
is not pressed the timer will return to the
or is