38
Section D - Replacement of parts
11.0 HOW TO REPLACE THE ELEMENTS (CONTINUED)
Figure 19
Figure 20
Figure 21
11.2 HOW TO REPLACE THE BROIL ELEMENT
1. Disconnect wall oven from electrical supply.
2. By the inside of the oven, remove the 2 screws holding
the broil element. (Figure 19)
3. Remove the element from it place by pulling it toward
you.
4. Replace the bake element and reassemble in reverse
order.
11.3 HOW TO REPLACE THE CONVECTION ELEMENT
1. Disconnect wall oven from electrical supply.
2. By the inside of the oven, remove the 3 screws holding
the convection fan cover. (Figure 20)
3. Remove the 3 screws holding the convection element
element (Figure 21).
4. Disconnect the 2 wires.
5. Replace the convection element and reassemble in
reverse order.