How To Replace The Safety Thermostat; How To Replace The Transformer; How To Replace The Elements; How To Replace The Bake Element - Electrolux Built-in Wall Oven Service Manual

Section D - Replacement of parts

9.0 HOW TO REPLACE THE SAFETY THERMOSTAT

1. Disconnect wall oven from electrical supply.
2. Remove wall oven from the cabinet. (section 1.0)
3. Remove the top panel. (section 2.0)
4. Remove the 2 screws holding the safety thermostat.
(Figure 16)
5. Disconnect the 2 wires.
6. Replace the safety thermostat and reassemble the
reverse order.

10.0 HOW TO REPLACE THE TRANSFORMER

1. Disconnect wall oven from electrical supply.
2. Remove wall oven from the cabinet. (section 1.0)
3. Remove the back panel. (section 2.0)
4. Remove the 2 screws holding the transformer. (Figure
17)
5. Disconnect the wire.
6. Replace the transformer and reassemble in reverse
order.

11.0 HOW TO REPLACE THE ELEMENTS

11.1 HOW TO REPLACE THE BAKE ELEMENT

1. Disconnect wall oven from electrical supply.
2. By the inside of the oven, remove the 2 screws holding
the bake element. (Figure 18)
3. Remove the element from it place by pulling it toward
you.
4. Replace the bake element and reassemble in reverse
order.
37
Figure 16
Figure 17
Figure 18